Engineering for Degree/Professional Level Engineers

Àpd 26 £ /h

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester. Since, I completed my course in September 2019. I have worked as a Teaching Assistant in the department of engineering. I was trained and certified to teach in higher education from Leicester Learning Institute. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using PSpice. Also, assisted in second year labs helping students to learn about material selection in electromechanical devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Overall, my aspects of teaching involved concepts related to designing, modelling, real life applications, mathematical calculations, physical and chemical sciences.

As a tutor, I would like to give my best abilities to improvise any individuals knowledge and make sure that they succeed in each & every aspects. At the same time, my commitment to teach with supporting and delivering the learning materials with at most reliability will always be my utmost priority. I will give what it takes to make an individual completely transformed into a knowledgeable individual. I believe one becomes intelligent by not just learning the concepts, but making the best use of it by applying in the real world.

Informations supplémentaires

Online

Lieu

En ligne depuis Royaume-Uni

Présentation

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester. Since, I completed my course in September 2019. I have worked as a Teaching Assistant in the department of engineering. I was trained and certified to teach in higher education from Leicester Learning Institute. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using PSpice. Also, assisted in second year labs helping students to learn about material selection in electro mechanical devices using CES Edu pack software, as well as different engineering materials micro structural properties and processing.

Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Overall, my aspects of teaching involved concepts related to designing, modelling, real life applications, mathematical calculations, physical and chemical sciences.

As a tutor, I would like to give my best abilities to improvise any individuals knowledge and make sure that they succeed in each & every aspects. At the same time, my commitment to teach with supporting and delivering the learning materials with at most reliability will always be my utmost priority. I will give what it takes to make an individual completely transformed into a knowledgeable individual. I believe one becomes intelligent by not just learning the concepts, but making the best use of it by applying in the real world.

Education

September 2018-2019: University of Leicester, United Kingdom- M.Sc. in Advanced Mechanical Engineering. Score- Distinction (70%)
• Relevant Modules- Matlab & CAD Modelling (Solid Works), Understanding Surfaces in Engineering, Aerospace Materials, Dynamics of Mechanical Systems, Computational Fluid Dynamics.

• M.Sc. project work carried out on Co-deposition of nickel-SiC using PRP techniques to produce nanocomposites.

August 2013-July 2017: Rajarajeswari College of Engineering, Bengaluru, India- Bachelor of Engineering in
Mechanical Engineering. Score- First Class (68.5%).

• Relevant Modules- Automation Lab, Material Science and Metallurgy, Manufacturing Process, Basic Thermodynamics, Mechanics of Composite Materials, Mechanics of Materials, Mechanical Vibrations, Mechatronics, Hydraulics and Pneumatics, Tool Design.

July 2011-March 2013: Pre-University Education, Bengaluru, India. (A-levels Equivalent) Score- First Class (79.2%)
• Relevant Modules- Physics, Chemistry, Mathematics, Electronics.

March 2011: Central Board of Secondary Education, Bengaluru, India. (GCSE Equivalent) Score- (79.8%)

Expérience / Qualifications

1 October 2019-April 2020: Teaching Assistant, University of Leicester, United Kingdom.
• Achieved training to teach in higher education at Leicester Learning Institute.
• Involved in concepts related to flow measurements in pipes and electrical oriented lab based on circuit design and analysis using PSpice.
• Involved in analysis for material selection in electromechanical devices using CES Edupack software.
• Demonstrated different engineering materials microstructural properties and processing.
• Engaged in providing a conceptual design process for a turbofan engine with improvements in aero engine design configurations.

Age

Adolescents (13-17 ans)

Adultes (18-64 ans)

Seniors (65+ ans)

Niveau du Cours

Débutant

Intermédiaire

Avancé

Durée

30 minutes

45 minutes

60 minutes

90 minutes

120 minutes

Enseigné en

anglais

Compétences

Génie mécanique

Génie industriel

Electrotechnique

Commentaires

Disponibilité semaine type

(GMT -05:00)

New York

Cours par webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Matías

4.88

(84)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Ahmed

4.88

(84)

Professeur agrégé en Sciences Industrielles de l’Ingénieur et Ingénierie Electrique, et Ingénieur d'état en génie électrique. Disponible pour des cours de soutiens, préparation aux concours et aux examens : IUT, BTS, EST, CPGE, UNIVERSITE, CYCLE D'INGENIEUR.

Je propose des cours en électronique, électrotechnique, automatique et électricité pour CPGE TSI, EST et BTS et des Ecoles d'ingénieurs.

Je dispose de tout les outils technologiques nécessaires pour donner des cours à distance et donc dispenser le cours dans d'excellentes conditions.

Méthode de travail :

Je fonctionne selon vos attentes puis je vous proposerez des cours plus ciblées pour combler vos lacunes.

1- Nous commençons par un rappel de cours en mettant l'accent sur les points clés.
2- Nous travaillons ensemble des exercices en lien direct avec le cours de la classe.
3- Nous abordons des exercices plus approfondis pour traiter les différents cas.

+ Electronique de puissance :
- Convertisseur statique DC/AC : Onduleur
- Convertisseur statique AC/DC : Redresseur
- Convertisseur statique DC/DC : Hacheur
- Convertisseur statique AC/AC : Gradateur

+ Electrotechnique:
- Machine à courant continu
- Variation de vitesse de la machine à courant continu
- Machine asynchrone.
- Variation de vitesse de la machine asynchrone
- Machine synchrone - Alternateur
- Transformateurs
- Régime monophasé et régime triphasé
- Energies renouvelables (solaire & éolienne)

+ Automatique :
- Automate programmable (Schneider et Siemens)
- Régulation industrielle
- Asservissement
- Microcontrôleurs

+ Electronique :
- Capteurs et détecteurs
- Amplificateurs opérationnels ALI
- Filtres analogiques : Filtrage
- Convertisseurs Analogique/Numérique CAN et CNA
- Systèmes logique combinatoires et séquentielles
- Modulation analogique (AM, FM, PM) et Modulation numérique (ASK, FSK, PSK, QAM)

+ Projets :
- Réalisation des projets à base d'arduino
- Simulations sur Proteus ISIS
- Réalisation des projets à base ESP8266 nodmcu ESP32

Yassine

4.88

(84)

Associate Professor and Doctor of Mechanical Engineering – Recognized academic expertise, combining scientific rigor and pedagogical excellence.

Private tutor for 10 years – A decade of experience in personalized support and student success.

I do not charge for extra time – My commitment is total: the time needed to understand and master the concepts is included.

Passionate and patient teaching – I teach with kindness, adapting to each individual's pace to transmit knowledge and methods in a lasting way.

Project and internship support – Structured guidance to enhance your work and strengthen your academic and professional record.

Sliding scale pricing based on the number of hours – A fair formula that rewards long-term investment.

I offer private online tutoring adapted to all levels of higher education:

🟥 Engineering Cycle • 🟥 Master's Degree • 🟥 Bachelor's Degree • 🟥 Preparatory Classes for the Grandes Écoles
🟥 Integrated preparatory courses • 🟥 DUT • 🟥 BTS • 🟥 Post-bac.
Which aim to:
🟡 Achieve excellent grades with guaranteed results thanks to a proven method.
🟡 Reinforcing fundamental concepts and acquiring practical tips.
🟡 Complete preparation for tutorials, homework, tests, exams and national competitions.
🟡 Specialized support for academic and industrial projects

🟢 Working method: an effective 3-step method
course review and summary
• drafting a complete summary sheet
· focus on important elements, key formulas and tips
• Fast and efficient revision support
progressive training
• Typical exercises and direct application
• problems of in-depth study
· complex synthesis exercises
optimal preparation
• Specific methods for each type of assessment
• Strategies for tests, exams and competitions
• simulations of tests under real-world conditions

I use remote platforms such as:
Zoom, Teams, Google Meet...
I use a graphics tablet as a tool.

Among the courses I teach:
🟢 Solid mechanics;
🟢 The mechanics of the point;
🟢 Strength of materials (SOM);
🟢 Continuum mechanics (CM);
🟢 Elasticity;
🟢 Structural calculations using finite element (FE);
🟢 Reinforced concrete structural calculations;
🟢 The vibration continues;
🟢 Fluid mechanics;
🟢 Hydraulics;
🟢 Thermodynamics;
🟢 Heat transfer;
🟢 Industrial design;
🟢 Aeronautics;
🟢 Machine components;
🟢 The materials;
🟢 Metallurgy;
🟢 Mechanical manufacturing processes;
🟢 Metrology;
🟢 Servomechanisms and regulation.

I offer continuing education courses or industrial projects to be carried out using modeling and numerical simulation software, CAM and CAD:
🟢 Ansys;
🟢 Abaqus;
🟢 Catia;
🟢 SolidWorks

4.88

(84)

Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Youssef

4.88

(84)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Abdeer

4.88

(84)

As an experienced teacher with a PhD in mechanical engineering, I offer specialized courses to master essential concepts in mechanical engineering:

Modules taught:
🔹 Continuous Media Mechanics (MMC): Introduction and in-depth study of the basics of continuous media mechanics, behavior laws, and practical applications.
🔹 Elasticity: Study of deformations and stresses in elastic solids, theory and resolution of complex problems.
🔹 Strength of Materials (RDM): Analysis and calculation of stresses, deformations, and dimensioning of mechanical structures.

Who are these courses for?
🎓 Students in preparatory classes, engineering schools, or technical faculties.
🏗️ Professionals wishing to strengthen their knowledge in mechanical engineering.

Why choose my courses?
✔️ Courses adapted to beginner to advanced levels.
✔️ Teaching based on concrete examples and typical exercises.
✔️ Personalized support for your projects, exams or competitions.
✔️ Clear and detailed course materials provided in each session.

Course organization:

Format: Individual or group lessons.
Modality: Online or in person (depending on your location).
Duration: Flexible depending on your objectives.

Mohamed

4.88

(84)

Hi,
I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success.

Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs.

Feel free to contact me for more information !

Nicolas

4.88

(84)

Cours en ligne : Bases de Données et SQL – Électricité et Magnétisme : Notions Fondamentales et Problèmes Courants

Durée :
- 60 minutes : Introduction aux concepts fondamentaux et résolution de problèmes simples.
- 90 minutes : Exploration approfondie des concepts clés avec des applications pratiques et exercices avancés.

---

Description générale
Ce cours innovant combine l’étude des notions fondamentales de l’électricité et du magnétisme avec des outils modernes d’analyse et de gestion des données. Il est conçu pour les étudiants et les professionnels souhaitant renforcer leur compréhension de ces phénomènes physiques tout en utilisant SQL pour modéliser, analyser et interpréter des données expérimentales ou théoriques. Grâce à une approche interactive et pratique, vous apprendrez à résoudre des problèmes classiques d’électricité et de magnétisme tout en intégrant des techniques modernes d’analyse de données.

---

Objectifs pédagogiques
À la fin de ce cours, les participants seront capables de :
1. Comprendre les bases des phénomènes électriques et magnétiques : lois de Coulomb, Ohm et Faraday, circuits électriques, et champs magnétiques.
2. Modéliser et interpréter des phénomènes physiques à l’aide de bases de données et SQL.
3. Résoudre des problèmes pratiques en électricité et magnétisme avec des méthodologies claires et des outils modernes.
4. Appliquer les concepts théoriques à des études de cas concrets intégrant des données expérimentales.

---

Programme du cours

1. Introduction aux concepts clés (10-15 min)
- Notions fondamentales : charges électriques, champ électrique, champ magnétique.
- Introduction à SQL et à son rôle dans l’analyse de données expérimentales.

2. Applications en électricité (20-30 min)
- Loi de Coulomb et interactions électriques.
- Étude des circuits électriques simples : résistance, courant, et loi d’Ohm.
- Utilisation de SQL pour stocker et analyser des données de circuits électriques.

3. Applications en magnétisme (20-30 min)
- Champ magnétique et loi de Faraday.
- Interprétation des phénomènes liés aux champs magnétiques.
- Représentation et analyse de données magnétiques avec SQL.

4. Approfondissement (format 90 min)
- Résolution de problèmes complexes combinant électricité et magnétisme.
- Étude de cas pratique : modélisation de phénomènes électriques et magnétiques dans un environnement de données réel.
- Création de requêtes SQL avancées pour explorer les résultats et identifier les tendances.

5. Q&R et conclusion (5-10 min)
- Résumé des concepts clés abordés.
- Suggestions de ressources pour approfondir les notions d’électricité, de magnétisme et d’analyse de données.
- Discussions sur les applications potentielles dans les domaines scientifiques et professionnels.

---

Méthodologie d’enseignement
- Approche hybride : association de concepts théoriques en physique et de pratiques modernes en analyse de données.
- Interactive et personnalisée : chaque session est adaptée au niveau des participants et encourage la participation active.
- Basée sur des cas réels : résolution de problèmes inspirés de situations expérimentales ou industrielles.

---

Public cible
Ce cours s’adresse à :
- Les étudiants en sciences, ingénierie ou informatique souhaitant renforcer leur compréhension des concepts d’électricité et de magnétisme.
- Les professionnels cherchant à modéliser des phénomènes physiques pour des projets ou des analyses de données.
- Toute personne intéressée par la physique appliquée et les outils modernes de gestion de données.

---

Avantages de ce cours en ligne
- Explications claires et adaptées aux débutants comme aux initiés.
- Exercices pratiques pour intégrer les notions théoriques à des applications concrètes.
- Utilisation d’outils modernes (SQL) pour analyser et visualiser les résultats.
- Flexibilité des horaires pour s’intégrer à votre emploi du temps.

Rejoignez ce cours dès aujourd’hui pour allier théorie physique et outils modernes d’analyse de données dans un format dynamique et interactif !

---

Ossama

4.88

(84)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Yassmine

4.88

(84)

As a mechanical engineer, I offer tutoring in mathematics, physics and mechanical engineering, adapting each session to the specific needs of the student. My goal is to make these subjects clear and accessible while promoting understanding and practical application of concepts.

Fatima

4.88

(84)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Mehdi

4.88

(84)

Fort de 13 ans d’expérience chez Enedis en tant que référent sécurité et formateur HTA/BT, et diplômé du BTS Électrotechnique (mention Très Bien), je propose des cours de mathématiques, physique appliquée et électrotechnique, adaptés à tous les niveaux (collège, lycée, BTS, ou formation adulte).
Ma méthode s’appuie sur la compréhension logique, la mise en pratique technique et la progression personnalisée selon le niveau de l’élève.
Chaque cours combine théorie, exercices ciblés et explications concrètes issues du terrain professionnel.
Objectif : comprendre, progresser, réussir.
Cours disponibles en ligne.

Abbass

4.88

(84)

This course offers a comprehensive and interactive introduction to Communication Systems, covering the essential concepts behind how information is transmitted, received, and processed across various communication channels. The course adapts to the student’s level (beginner, intermediate, or advanced) and provides a solid foundation in both analog and digital communication.

Students will learn the theoretical principles that govern modern communication systems and reinforce learning through practical examples and optional hands-on simulations using MATLAB or Python. Real applications related to wireless networks, mobile communications, satellite links, IoT, and modern digital communication can be integrated depending on the student’s interests.

Sahbi

4.88

(84)

Learn electronics in a simple and practical way, adapted to your school level and needs. These courses are designed for all ages, from primary school to high school, and are available in French and Arabic.

You will learn :

The basics of electronics and electrical circuits
The operation of electronic components (resistors, LEDs, capacitors, etc.)
Simple setups and practical projects
Applying the concepts to the school curriculum

Each lesson is personalized according to the student's age and level, with interactive exercises and clear explanations to facilitate understanding.

Individual or small group online courses
Educational materials in PDF format and explanatory videos
Practical exercises adapted to the school curriculum
Personalized tracking to measure progress

Chrayet

4.88

(84)

This lesson aims to introduce the 5S methodology as a core tool of Lean Manufacturing to improve workplace organization, increase productivity, and enhance safety and quality.
The trainee learns about the five stages of the methodology (sorting, arranging, cleaning, standardizing, and discipline), with practical examples from industrial reality and how to move from theory to practical application within workshops and institutions.
The lesson is aimed at students, engineers, and technicians who wish to gain a solid foundation in continuous improvement and build a culture of discipline and organization.