Engineering science support courses at home or remotely in Kénitra, Rabat and Casablanca. - Casablanca - Private lessons

Translated by GoogleSee original

Engineering science support courses at home or remotely in Kénitra, Rabat and Casablanca.

From 8.66 £ /h

Hello everyone. My name is Ayoub, a professor of industrial sciences, with more than 6 years of experience in academic support.

I offer private engineering science lessons at home in Kenitra, Rabat and Casablanca or remotely for pupils and students:
• Who has basic difficulties or deficiencies...
• Who want to strengthen the base and get used to the techniques seen throughout the course and which are always useful to know and master.
• Who wish to review the essentials of the previous year's program and get ahead of the program.

These courses are intended for CP-BTS and high school students and are personalized for each student according to their level, ability and motivation, guaranteeing the best marks in the national exam.

Methodology

The course takes place in three stages:
1) Summary and explanation of the course or chapter to work on then target the essentials of the course.
2) Do simple exercises to put the course into practice and apply an effective method of solving and writing exercises.
3) In a third step I give exercises with increasing difficulty that the student will do on his own to test him and put him in a condition to manage independently. We correct this list of exercises together and the unsuccessful exercises are to be redone by the student for the next session.

Location

|

Use Ctrl + wheel to zoom!

At student's location :

Around Casablanca, Morocco

At teacher's location :

YOUSSEF Web master digital markter, Casablanca, Maroc

benthami motors, Quartier de Bir Rami, Kénitra, Maroc

Online from Morocco

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

120 minutes

The class is taught in

French

Arabic

English

Skills

Mechanical engineering

Electrical engineering

Availability of a typical week

(GMT -05:00)

New York

At teacher's location and via webcam

At student's home

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Electrical engineering
Electronic
power Electronic
motor drive
electrical circuit
renewable energy
automation
electrical drive
industriel control
transformer
electrical energy
hight voltage
low volatge
simulation
calculation
etc

Course in Electronics: Microcontroller (PIC, atmega ..), Electronic circuit, Power electronics
Automation course: GRAFCET, LADDER, Bascule, Combinatorial logic
Electric motor: Asynchronous machine, DC motor, synchronous machine

As an Associate Professor of Industrial Engineering (CPGE), a State Engineer in Mechanical Engineering and a Doctor (PhD), I offer private mechanics lessons all year round, remotely or at home, for pupils and students.

For who ?

Objective of excellence (improvement, ranking, selective applications).

Refresher courses in case of gaps or weak foundations.

Consolidation of fundamentals and mastery of useful techniques throughout the course.

Targeted preparation for tests, exams and oral presentations.

CPGE competitive entrance exams: CCINP, Centrale, Mines-Ponts, MP, PSI, TSI streams.

Technological Baccalaureate: STM, STE, SMB (refresher and intensive training).

Project support (final year project, TIPE, mini-projects).

Revision/preparation: review the essentials of the past year and get ahead.

Subjects taught

Solid mechanics: kinematics, statics, dynamics, energy (and kinetics).

Strength of materials & vibration; elasticity; fracture mechanics.

Mechanism theory.

Mechanical engineering & mechanical manufacturing (processes, tolerances, metrology).

Materials: mechanical characterization; equilibrium diagrams (binary, Fe-C).

Thermal and thermochemical treatments.

MMC (continuous media): modelling and calculations.

CAD/Design: CATIA, SolidWorks.

NDT/NDT: principles and applications (basics).

Terms and conditions

Format: individual or small groups.

Location: online (interactive whiteboard, screen sharing, files) or at home.

Method: initial diagnosis, personalized work plan, progressive exercises, exam-style questions, annotated corrections, regular assessments.

Materials: summary sheets, roadmaps, bibliographies, corrected exercises.

Targeted results

Solid foundations, operational methods, autonomy and sustainable performance.

Effective preparation for assessments and competitions, increased confidence and speed.

Do you want to significantly increase your child's mathematical average?
Do you want it to integrate a selective course?
Do you want it to become autonomous?

For 7 years, I have helped more than 100 students in difficulty from middle school and high school to achieve their goals and regain self-confidence.

My method in 3 points:
- in the short term, significantly increase the average by assimilating the course and preparing for the next tests (assimilating the course, writing files, practicing standard exercises, anticipating the teacher's expectations and test questions, having methods of writing)
- in the medium term, integrate reasoning and work methods (learn to work regularly in this order: assimilation, training exercise, preparation for the test and analysis of the pass test)
- in the long term, set a goal, build the steps to reach this goal, become aware of the SIMPLICITY of math, have confidence in your abilities, release your potential)

Your child can contact me whenever he wants

If you want to increase your child's math results, contact me before the next test!

Are you in preparatory classes (CPGE) and want to excel in Engineering Sciences? I offer personalized courses to support you in key subjects, with a pedagogy adapted to your academic needs and your objectives.

Modules taught:
🔧 Strength of Materials (RDM): Analysis of stresses, deformations and dimensioning of structures.
⚙️ Elasticity: Study of elastic solids and resolution of stress and deformation problems.
🌊 Fluid and solid mechanics: Fundamental concepts and applications in the field of fluid structures and systems.
💻 Industrial computing: Programming, automation and simulation of industrial systems.

Highlights of my courses:
✔️ Methodical and structured approach adapted to the CPGE program.
✔️ Typical exercises and solving complex problems.
✔️ Specific preparation for competitive examinations for major engineering schools.
✔️ Clear and detailed teaching materials provided in each session.

For who ?
🎓 Students in scientific preparatory classes (CPGE).
🏫 Students and professionals looking to strengthen their knowledge in SII.

Course organization:

Format: Individually or in small groups.
Modalities: Online or in person depending on your preferences.
Flexibility: Classes tailored to your schedule.

By being an engineer who has experienced all the possibilities of stress that a student can encounter when understanding it, a teacher who has encumbered an experience for years, I have developed teaching and efficient methods in order to better explain to my students.
For me, a student needs a logical explanation of things and a personalized follow-up in order to be able to better advance and develop their own skills.

Distance courses:
-----------------------------------
I can give distance lessons perfectly since I have a tablet on which I can work in the same way as if it were a notebook. The student can see everything I do live through screen sharing, and all they need is to use a computer. At the end of the course, I send him a copy of all the work done, which allows me to make sure that he has kept a clean record of the course spent together.

Domains :
-------------------------------------------------- ------------------

* Digital Electronics:
-------------------------------------------
- Boolean algebra
- Combinatorial systems
- Sequential systems
- Counters and decounters
- Registers and memories
- ....

* Analog electronic:
-------------------------------------------
- Semiconductor and PNP Junction
- Diodes and transistors
- Bipolar transistors and JFET (Static and dynamic analysis)
- Operational amplifier in linear and non-linear mode
- Frequency analysis (Bode, Nichols, Nyquist diagram ...)
- Analog filtering
- Analog Oscillator
- Converters: CAN and CNA
- Modulation
- Differential amplifier
- ...

* Electrical engineering:
--------------------------------
- Single-phase network
- Three-phase network
- Coil and magnetic circuit
- Single-phase and three-phase transformers
- Direct current machine (MCC)
- Asynchronous Machine (MAS)
- Synchronous Machine (MS)
- Speed variators
-....

* Power electronics:
----------------------------------------------
- Choppers
- Rectifiers
- Inverters
- Dimmers
- Speed variator
-....

* Industrial Automation:
----------------------------------------
- Grafcet and GEMMA
- State graph / state diagram
- Programmable controllers (Siemens, Schnieder ...)
- Programmable circuits (Microcontrollers, arduino ...)
-....

* Linear automatic - Servo-control and regulation:
-------------------------------------------------- -----------------------------------
- Laplace transformation
- Transfer function
- Functional diagrams
- Dynamic performance of linear systems: Speed, Precision and Stability
- The correctors: P, PI, PID, phase advance, phase delay, ...
- Regulation and servoing
- Digital servo
-....

-------------------------------------------------- ---------------
Additional Information
Zoom or Google meet
Whiteboard

Anyway, I'll be there to help you move forward and love this area more.
Are you ready to experience this learning adventure with me?

At the end of this training, you will be able to understand:

Electrical power balance
Medium voltage and electrical sources
Earthing and neutral systems
Types of protection - Choice and setting of protections
CANECO Low voltage

Associate Professor and State Engineer, teacher in public preparatory classes, I give courses in Engineering Sciences for CPGE levels and for university.
Experience of success in course support, monitoring and personalized educational supervision according to the needs of each student.
Professor with a versatile profile, with good experience in the industrial field (Study, design, production, maintenance, etc.) in addition to experience in higher education: course preparation, technical training, project supervision and internships students.

Face-to-face or distance learning courses
Preparation Proctored assignments and module exams
Preparation for competitions
For more information contact me.

SOLIDWORKS is a 3D modeler using parametric design. It generates 3 types of files relating to three basic concepts: the part, the assembly and the drawing. These files are related. Any modification at any level whatsoever is passed on to all the files concerned.

I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering:
CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school
1 Introduction to automation
- Problem and objectives
- API architecture
- API selection criteria
2 PLC programming language
- GRAFCET language
- Method of transcription of a GRAFCET in LADER language
3 Programming Siemens PLCs
- Learn the TIA PORTAL environment
- Hardware and software configuration
4 Implementation of the analog I/O concept
5 Methodology of study and realization of a project
6 Supervision of industrial systems

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs.
Homework help for Baccalaureate students.
preparation for the competition.
For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

Former CPGE prep classes students
Aeronautical engineer graduated from ISAE Supaero
Doctorate in Mathematics and applications from Toulouse 3 University
+3 years of experience (+350 hours) in higher education Bachelor / Master / Engineering Cycle
1 year of industry experience
Very good teaching and communication

Hello everyone,

Holding a Master's degree in Civil Engineering from France, and currently working as a Construction Project Manager, I offer tutoring in the subjects mentioned. Please feel free to contact me for more information.

Best regards,

Electrical engineering
Electronic
power Electronic
motor drive
electrical circuit
renewable energy
automation
electrical drive
industriel control
transformer
electrical energy
hight voltage
low volatge
simulation
calculation
etc

Course in Electronics: Microcontroller (PIC, atmega ..), Electronic circuit, Power electronics
Automation course: GRAFCET, LADDER, Bascule, Combinatorial logic
Electric motor: Asynchronous machine, DC motor, synchronous machine

As an Associate Professor of Industrial Engineering (CPGE), a State Engineer in Mechanical Engineering and a Doctor (PhD), I offer private mechanics lessons all year round, remotely or at home, for pupils and students.

For who ?

Objective of excellence (improvement, ranking, selective applications).

Refresher courses in case of gaps or weak foundations.

Consolidation of fundamentals and mastery of useful techniques throughout the course.

Targeted preparation for tests, exams and oral presentations.

CPGE competitive entrance exams: CCINP, Centrale, Mines-Ponts, MP, PSI, TSI streams.

Technological Baccalaureate: STM, STE, SMB (refresher and intensive training).

Project support (final year project, TIPE, mini-projects).

Revision/preparation: review the essentials of the past year and get ahead.

Subjects taught

Solid mechanics: kinematics, statics, dynamics, energy (and kinetics).

Strength of materials & vibration; elasticity; fracture mechanics.

Mechanism theory.

Mechanical engineering & mechanical manufacturing (processes, tolerances, metrology).

Materials: mechanical characterization; equilibrium diagrams (binary, Fe-C).

Thermal and thermochemical treatments.

MMC (continuous media): modelling and calculations.

CAD/Design: CATIA, SolidWorks.

NDT/NDT: principles and applications (basics).

Terms and conditions

Format: individual or small groups.

Location: online (interactive whiteboard, screen sharing, files) or at home.

Method: initial diagnosis, personalized work plan, progressive exercises, exam-style questions, annotated corrections, regular assessments.

Materials: summary sheets, roadmaps, bibliographies, corrected exercises.

Targeted results

Solid foundations, operational methods, autonomy and sustainable performance.

Effective preparation for assessments and competitions, increased confidence and speed.

Do you want to significantly increase your child's mathematical average?
Do you want it to integrate a selective course?
Do you want it to become autonomous?

For 7 years, I have helped more than 100 students in difficulty from middle school and high school to achieve their goals and regain self-confidence.

My method in 3 points:
- in the short term, significantly increase the average by assimilating the course and preparing for the next tests (assimilating the course, writing files, practicing standard exercises, anticipating the teacher's expectations and test questions, having methods of writing)
- in the medium term, integrate reasoning and work methods (learn to work regularly in this order: assimilation, training exercise, preparation for the test and analysis of the pass test)
- in the long term, set a goal, build the steps to reach this goal, become aware of the SIMPLICITY of math, have confidence in your abilities, release your potential)

Your child can contact me whenever he wants

If you want to increase your child's math results, contact me before the next test!

Are you in preparatory classes (CPGE) and want to excel in Engineering Sciences? I offer personalized courses to support you in key subjects, with a pedagogy adapted to your academic needs and your objectives.

Modules taught:
🔧 Strength of Materials (RDM): Analysis of stresses, deformations and dimensioning of structures.
⚙️ Elasticity: Study of elastic solids and resolution of stress and deformation problems.
🌊 Fluid and solid mechanics: Fundamental concepts and applications in the field of fluid structures and systems.
💻 Industrial computing: Programming, automation and simulation of industrial systems.

Highlights of my courses:
✔️ Methodical and structured approach adapted to the CPGE program.
✔️ Typical exercises and solving complex problems.
✔️ Specific preparation for competitive examinations for major engineering schools.
✔️ Clear and detailed teaching materials provided in each session.

For who ?
🎓 Students in scientific preparatory classes (CPGE).
🏫 Students and professionals looking to strengthen their knowledge in SII.

Course organization:

Format: Individually or in small groups.
Modalities: Online or in person depending on your preferences.
Flexibility: Classes tailored to your schedule.

By being an engineer who has experienced all the possibilities of stress that a student can encounter when understanding it, a teacher who has encumbered an experience for years, I have developed teaching and efficient methods in order to better explain to my students.
For me, a student needs a logical explanation of things and a personalized follow-up in order to be able to better advance and develop their own skills.

Distance courses:
-----------------------------------
I can give distance lessons perfectly since I have a tablet on which I can work in the same way as if it were a notebook. The student can see everything I do live through screen sharing, and all they need is to use a computer. At the end of the course, I send him a copy of all the work done, which allows me to make sure that he has kept a clean record of the course spent together.

Domains :
-------------------------------------------------- ------------------

* Digital Electronics:
-------------------------------------------
- Boolean algebra
- Combinatorial systems
- Sequential systems
- Counters and decounters
- Registers and memories
- ....

* Analog electronic:
-------------------------------------------
- Semiconductor and PNP Junction
- Diodes and transistors
- Bipolar transistors and JFET (Static and dynamic analysis)
- Operational amplifier in linear and non-linear mode
- Frequency analysis (Bode, Nichols, Nyquist diagram ...)
- Analog filtering
- Analog Oscillator
- Converters: CAN and CNA
- Modulation
- Differential amplifier
- ...

* Electrical engineering:
--------------------------------
- Single-phase network
- Three-phase network
- Coil and magnetic circuit
- Single-phase and three-phase transformers
- Direct current machine (MCC)
- Asynchronous Machine (MAS)
- Synchronous Machine (MS)
- Speed variators
-....

* Power electronics:
----------------------------------------------
- Choppers
- Rectifiers
- Inverters
- Dimmers
- Speed variator
-....

* Industrial Automation:
----------------------------------------
- Grafcet and GEMMA
- State graph / state diagram
- Programmable controllers (Siemens, Schnieder ...)
- Programmable circuits (Microcontrollers, arduino ...)
-....

* Linear automatic - Servo-control and regulation:
-------------------------------------------------- -----------------------------------
- Laplace transformation
- Transfer function
- Functional diagrams
- Dynamic performance of linear systems: Speed, Precision and Stability
- The correctors: P, PI, PID, phase advance, phase delay, ...
- Regulation and servoing
- Digital servo
-....

-------------------------------------------------- ---------------
Additional Information
Zoom or Google meet
Whiteboard

Anyway, I'll be there to help you move forward and love this area more.
Are you ready to experience this learning adventure with me?

At the end of this training, you will be able to understand:

Electrical power balance
Medium voltage and electrical sources
Earthing and neutral systems
Types of protection - Choice and setting of protections
CANECO Low voltage

Associate Professor and State Engineer, teacher in public preparatory classes, I give courses in Engineering Sciences for CPGE levels and for university.
Experience of success in course support, monitoring and personalized educational supervision according to the needs of each student.
Professor with a versatile profile, with good experience in the industrial field (Study, design, production, maintenance, etc.) in addition to experience in higher education: course preparation, technical training, project supervision and internships students.

Face-to-face or distance learning courses
Preparation Proctored assignments and module exams
Preparation for competitions
For more information contact me.

SOLIDWORKS is a 3D modeler using parametric design. It generates 3 types of files relating to three basic concepts: the part, the assembly and the drawing. These files are related. Any modification at any level whatsoever is passed on to all the files concerned.

I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering:
CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school
1 Introduction to automation
- Problem and objectives
- API architecture
- API selection criteria
2 PLC programming language
- GRAFCET language
- Method of transcription of a GRAFCET in LADER language
3 Programming Siemens PLCs
- Learn the TIA PORTAL environment
- Hardware and software configuration
4 Implementation of the analog I/O concept
5 Methodology of study and realization of a project
6 Supervision of industrial systems

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs.
Homework help for Baccalaureate students.
preparation for the competition.
For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

Former CPGE prep classes students
Aeronautical engineer graduated from ISAE Supaero
Doctorate in Mathematics and applications from Toulouse 3 University
+3 years of experience (+350 hours) in higher education Bachelor / Master / Engineering Cycle
1 year of industry experience
Very good teaching and communication

Hello everyone,

Holding a Master's degree in Civil Engineering from France, and currently working as a Construction Project Manager, I offer tutoring in the subjects mentioned. Please feel free to contact me for more information.

Best regards,

Good-fit Instructor Guarantee

Contact Ayoub