Core Concepts in Civil Engineering: Materials, Engineering Economy, Project Management and Statics

From 101 £ /h

I am an experienced tutor specializing in civil engineering subjects, with a particular focus on Materials Science, Engineering Economy, and Statics. With a BSc, MSc and PhD in Civil Engineering from [ University of Surrey, UK, I bring both academic knowledge and practical experience to my tutoring sessions. My goal is to help students not only understand the core concepts but also apply them effectively in their coursework and future careers.

Extra information

please specify the main topics you are concerned with

Location

Online from Germany

About Me

Education

University of Surrey , UK
Civil Engineering (PhD),
Water and Environmental Engineering (MSc)
Kingston University, UK Environmental and Earth Resources Management (PGDip)
Eastern Mediterranean University - Industrial. Engineering (BSc)

Experience / Qualifications

over 15 years of teaching at various Universities in the world. (UK, Germany, Turkey, Cyprus). I have been teaching engineering courses since 2008.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Turkish

Skills

Civil engineering

Industrial engineering

Engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Engineering Economy: Economic Analysis for Engineering Projects

101 £ /h

The purpose of this course is to supplement engineering student’s technical training with the knowledge and capability to perform financial analysis especially in the area of capital investment. The objectives of this course are:
1. To use engineering economy factors and different methods for the evaluation of alternatives
2. To carry out sensitivity analysis
3. To integrate the effects of inflation, depreciation and/or tax into an economic analysis whenever necessary
4. To use computer software for engineering economy analysis

Introduction to Engineering Mechanics: Statics; Statics and Structural Analysis in Engineering

101 £ /h

Statics: Students will begin by exploring the equilibrium of particles and rigid bodies. Topics include force vectors, moments, and the conditions required for objects to remain in static equilibrium. The course will delve into structural analysis, centroids, moments of inertia, and the application of these principles in real-world engineering contexts.

Matías

4.88

(85)

Do you aspire to master mathematics, physics and engineering at a university level? Do you want to exceed your limits and excel in these demanding fields? Do not search anymore ! Our tailor-made private lessons are there for you.

Why choose our courses?

Unparalleled Expertise: Our professors are experts in their field, with extensive experience in university teaching. They are ready to guide you towards success.

Personalized Program: We tailor each course to your specific needs, from understanding fundamental concepts to solving complex problems.

Total Flexibility: Choose the schedule that suits you best. Whether you are an active student or a professional, we adapt to your schedule.

Constant Support: You will benefit from continuous monitoring between classes to answer all your questions and concerns.

Quality Teaching Materials: We provide high-quality learning resources to support your progress.

Who can benefit from our courses?

High school students preparing for their baccalaureate or entrance exams to engineering schools.

University students pursuing a degree in mathematics, physics or engineering.

Professionals looking to acquire or deepen technical skills.

Join us today!

Excellence doesn't wait. Contact us now to book your first lesson. Together we will build a bright future based on a solid understanding of mathematics, physics and engineering.

Haider

4.88

(85)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ CAD (including CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ FEM (including Ansys, CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ CFD (including Ansys CFX & Fluent, OpenFoam, CREO)
✔ Energy theory
✔ Thermal theory
✔ Chemistry
✔ BQ NTG
✔ HQ technology
✔ Computer science
✔ Structural theory (TWL 1 to 3)
✔ Elastostatics
✔ Dynamics
✔ Materials science
✔ Steel construction

+ other subjects on request

When contacting us, please state your class/course of study/training and subject!

I am looking forward to hearing from you.

Jeremy

4.88

(85)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 6 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Reza

4.88

(85)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Adam

4.88

(85)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.88

(85)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.88

(85)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. As it is highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A major part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduate Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of experience and knowledge of the program to help you out with the right preparation to get in. Over the last four years, I have helped tens of students secure a spot! Moreover, I offer a free personalised lesson plan for each student, which is fully based on the admission syllabus and past exams, to ensure an even higher chance of admission for each student.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will become more effective and accurate. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, the city of Delft, what to expect from the study and whether it is the right fit for you.

Rayane

4.88

(85)

Statics is an introductory course in engineering mechanics that focuses on the analysis of forces acting on stationary objects or structures. Through this course, students learn the fundamental principles of equilibrium, including the resolution and composition of forces, moments, and couples. Topics typically covered include vector algebra, free-body diagrams, trusses, frames, centroids, and moments of inertia. The course serves as a foundation for understanding more complex engineering concepts and is essential for fields such as civil, mechanical, and aerospace engineering.

يحيى

4.88

(85)

Lesson:
This course is a cornerstone for any student aspiring to excel in scientific and technological fields. The lesson focuses on transitioning from traditional mathematics to the world of "instantaneous change" through the study of limits, derivatives, and their vital applications.
In this course you will learn:
• A deep understanding of Limits and Continuity.
• Mastering the rules of differentiation for various functions (trigonometric, exponential, and logarithmic functions).
• Applying differentiation to solve real-world problems such as finding maximum, minimum, and time-related rates.
• A preliminary introduction to the concept of integration and spaces.
This content is designed to be a practical and comprehensive guide to help you excel academically and pass exams with high efficiency.
):
Calculus I serves as the bridge between school mathematics and advanced university science. This course is specifically designed to enable students to understand the "language of movement and change" that governs our world, and it is a fundamental and essential requirement for engineering, artificial intelligence, and science students at top universities nationwide.
What will the student learn on this academic journey?
• The philosophy of limits and continuity: We will break the barrier of fear of limits, to learn how to predict the behavior of functions at critical points and how to determine the continuity of curves, which is a vital basis for understanding the stability of geometric systems.
• The Art of Derivative: The student will practice extracting the instantaneous rate of change using advanced differentiation rules (Product, Quotient, and Chain Rules), with a strong focus on trigonometric and logarithmic functions that appear frequently in EmSAT exams.
• Real-world applications (Optimization): We will not be satisfied with paper-based solutions, but will learn how to use differentiation to find optimal solutions (maximum and minimum values), such as determining the shortest path or achieving the highest technical efficiency at the lowest possible cost.
• Introduction to Integration: We will lay the foundation for the science of integration by understanding the inverse relationship between differential and integral calculus, which will fully prepare the student for the Calculus 2 course.
Why choose this lesson?
We don't just solve equations; we aim to build an "analytical mindset." This approach simplifies complex concepts, connects them to practical realities, and equips students with smart strategies for tackling the most frequently asked exam questions in UAE university curricula, ensuring not just success, but excellence and an A grade.
Additional information for the student (more detailed):
• Prerequisites: The student should preferably have a good understanding of the basics of algebra and the ability to solve equations and inequalities.
• Required tools: A scientific calculator (preferably advanced models such as those allowed in EMAST), and a graph book to track the behavior of the curves.
• Session approach: We follow a strict and organized system of explanation based on progression from easy to difficult, while providing training examples that simulate actual final exams.

Alonso

4.88

(85)

I am a Mechanical Engineer, Master in Mechanical Engineering and Retired Full Professor from the University of Zulia (Venezuela).
I taught university-level engineering courses for over 30 years. I helped train more than 9,000 students. I supervised over 50 undergraduate theses. I taught undergraduate and graduate courses in various subjects related to mechanical engineering (Mathematics, Physics, Dynamics, Mechanisms, Strength of Materials, Stability, Solid Mechanics, Fluid Mechanics, Machine Elements, Machine Design, Statics, Mechanics of Machines, Mechanics of Materials, Rational Mechanics, Principles of Lubrication, Simulation of Sliding Bearings, Advanced Mechanics of Materials, Stress Analysis, Failure Theories, Structures, Mechanisms). In addition, I have given private lessons in Physics, Statics, Strength of Materials, Stability I, Stability II, Fluid Mechanics, Rational Mechanics, Mechanics of Materials, Dynamics, Elements of Machines and Mechanisms for 7 years to students from different countries of the world (online) and in particular to students from Argentina (online and in person) from various universities in the country (UBA, ITBA, UTN, UNLZ, UADE, etc).

Stop struggling with Strength of Materials! Many students get lost among so many formulas. My goal is for you to understand the physical logic behind each problem. I am a university professor and offer personalized tutoring for undergraduate and graduate students.
What we will do:
- Solve exercise guides.
- Intense preparation for midterms/finals.
- Theoretical explanations focused on practice.
I have extensive experience teaching courses related to Mechanical Engineering at both the undergraduate and graduate levels. I have taught courses such as Strength of Materials, Stability I, Stability II, Statics, Mechanics of Materials, Elasticity, Mechanics of Solids, Fluid Mechanics, Machine Elements, Rational Mechanics, Stress Analysis, Mechanisms, Mechanics of Machines, and Advanced Mechanics of Materials. Furthermore, I have a strong background in Mathematics, Mathematical Analysis, Calculus, and Physics (Statics, Kinematics, and Dynamics). I emphasize teaching through problem-solving and practical applications.
For online classes I use a digitizing tablet connected to the computer and an interactive digital whiteboard that allows me to develop and explain the solution to exercises or the theory in real time directly on PDF or JPG files (they can be exercise or theory guides), which makes the class more enjoyable and efficient and also guarantees the same quality as a face-to-face class.

I am a University Professor with extensive experience in teaching subjects related to Mechanical Engineering at the Undergraduate and Postgraduate levels. I have taught subjects such as Strength of Materials, Stability, Elasticity, Solid Mechanics, Machine Elements, Rational Mechanics, Stress Analysis, Mechanisms, Machine Dynamics and advanced materials mechanics. In addition, I have a solid background in Mathematics, Mathematical Analysis, Calculus and Physics (Kinematics and Dynamics). I emphasize through problem solving and practical applications.

Baia

4.88

(85)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Stéphane

4.88

(85)

As a civil engineer with an EPFL degree, I have been working in a design office since 2020: excavations, retaining walls, foundations, numerical modeling, and site supervision. I mentor junior engineers and interns in this role, and I write reports explaining these calculations to clients who are not engineers.

I support students from EPFL, HES and vocational schools in the branches that filter: statics, strength of materials, reinforced concrete, soil mechanics and foundations.

We work on your past exams and series. For geotechnics and foundations, I show you how these calculations are actually carried out in the office and according to which standards, which makes the material much more understandable than a formula learned by heart.

I also cover technical professional maturity and preparation for admission to a University of Applied Sciences.

Tools I use daily: PLAXIS, GEO5, K-REA, AutoCAD and reading execution plans.

Online courses with a shared whiteboard, or in person in the Neuchâtel region.

Asad

4.88

(85)

Learn CATIA V5, CAD design and engineering modeling through practical, step-by-step online lessons tailored to your level and goals.

I teach Computer-Aided Design (CAD), 3D modeling, technical drawing and engineering design for high school, college, university and professional learners. Whether you are starting from scratch, preparing for an exam, working on a CAD project or improving your design skills, lessons are adapted to your specific requirements.

Topics can include:

CATIA V5: Part Design, Sketcher, Generative Shape Design, Assembly Design, Drafting and detailed engineering drawings.

CAD & 3D Modeling: 2D sketches, 3D part modeling, assemblies, surface modeling, parametric design, design modifications and engineering documentation.

Engineering Design: Mechanical and aerospace components, product development, design for manufacturing, fabrication-ready models and practical engineering workflows.

Technical Drawing: Orthographic views, dimensions, annotations, section views, tolerances, drawing standards and production-oriented documentation.

Practical CAD Projects: Reverse engineering, 3D printing, laser-cutting preparation, component design, UAV/drone parts, aerospace components and engineering projects.

Whether you need CATIA V5 training, CAD tutoring, project guidance, assignment support, exam preparation or help understanding a specific modeling problem, I focus on helping you develop the skills to create accurate and practical engineering designs independently.

My goal is not simply to show you which tools to click, but to help you understand the design process, modeling strategy and engineering reasoning behind the work.

Joseff

4.88

(85)

Engineering tutoring up to Master's level. I have completed a PhD in Aerospace Engineering. I developed a new type of electric propulsion for spacecraft. I have also published two research papers. I was a university employed teaching assistant for two years, helping third-year aerospace undergraduates complete their third-year group project.

I offer bespoke tutoring sessions. You provide your course material/past exams that you need help with, and we'll work through it together. We'll identify the topics that you would like tutoring in, and I'll help you understand them in an enthusiastic and stress-free environment.

MATLAB help also available!