Mechanical Engineering and Engineering Tutor (Online) | Thermodynamics, Solid Mechanics, Dynamics, Control Systems, Engineering Materials

From 35 £ /h

If you want clear, exam-ready Engineering and Mechanical Engineering help, this is a strong fit.

My difference: you send your materials first, I confirm fit, then we use a repeatable system that builds results fast.

FAST START (SEND MATERIALS FIRST)
---------------------------------------------------
Send your syllabus or PDF slides, past papers, tutorial sheets, or assignment brief.

I confirm fit before we book. If it is outside my strengths, I will tell you directly.

WHAT I HELP WITH (HIGH-INTENT TOPICS)
---------------------------------------------------
• Thermodynamics
• Solid Mechanics / Strength of Materials
• Engineering Dynamics
• Control Systems
• Engineering Materials
• MATLAB + Simulink (modelling, simulation, verification)

HOW EACH LESSON WORKS (TYPICAL SESSION)
---------------------------------------------------
1) Diagnose
• identify the exact weak point, concept, method, or exam technique

2) Build (clear and fast)
• definitions, assumptions, units, sign conventions
• diagrams where needed (FBD, shear and moment, block diagrams)

3) Solve (guided)
• I show the method on a representative question
• you solve a similar one with live correction
• quick checks, units, limits, sanity

4) Exam mode (when relevant)
• past papers, mark schemes, what earns marks
• speed, structure, presentation

AFTER EACH LESSON (WHAT YOU RECEIVE)
---------------------------------------------------
• short revision note, key method + mistakes to avoid
• focused practice list
• progress note, strengths, gaps, next targets

Optional: recorded session for revision

MATLAB / SIMULINK SUPPORT (WHEN NEEDED)
---------------------------------------------------
• modelling, simulation, plotting, debugging
• verify results against theory, interpret correctly

COURSEWORK + ASSIGNMENTS (LEGIT SUPPORT ONLY)
---------------------------------------------------
• understand the brief, plan your approach, improve your method
• review your work, fix errors, strengthen reasoning

No done-for-you submissions, no cheating.

MESSAGE ME LIKE THIS (FAST REPLY)
---------------------------------------------------
1) Level:
2) Module/Course name:
3) Exam date or deadline:
4) Topics:
===================================

Extra information

You can review the above description for information, and don't hesitate to contact me to ask any questions. You're welcome...

Location

Online from United Kingdom

About Me

I am an Aerospace Engineering student at the Institute of Space Technology, Islamabad, and an experienced online tutor for engineering and STEM subjects. I help students develop real understanding in engineering topics through clear explanations, structured lessons, and step-by-step problem solving. My approach is not based on rushed memorisation. It is based on concept clarity, logical thinking, and practical application.

I work with students at school, college, and university level who need help in engineering fundamentals, mathematics for engineering, physics-based reasoning, assignments, exam preparation, and technical confidence. I particularly enjoy supporting students who find engineering overwhelming and want a tutor who can break difficult topics into manageable parts. My aim is to help students improve both their grades and their way of thinking, so they can solve problems independently and perform better over the long term.

Education

Education

B.E. Aerospace Engineering, Institute of Space Technology, Islamabad
Senior-year undergraduate student

Relevant academic background in engineering mechanics, thermodynamics, aerodynamics, control systems, propulsion, numerical analysis, CAD, artificial intelligence, digital systems, and spacecraft dynamics

Experience / Qualifications

I have been teaching online for several years and have worked with students across different levels in STEM and technical subjects. My tutoring experience includes helping students strengthen weak concepts, improve problem-solving ability, prepare for exams, and handle assignments with a more structured method.

As an Aerospace Engineering student, I bring an applied engineering perspective to my lessons. I do not only explain theory, I connect concepts with real engineering logic and practical understanding. I am best suited for students who want disciplined, concept-focused support in engineering-related subjects and who value a patient tutor with a systematic teaching approach.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Urdu

Panjabi

Hindi

Skills

Engineering

Mechanical engineering

Thermodynamics

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Matías

4.88

(85)

Do you aspire to master mathematics, physics and engineering at a university level? Do you want to exceed your limits and excel in these demanding fields? Do not search anymore ! Our tailor-made private lessons are there for you.

Why choose our courses?

Unparalleled Expertise: Our professors are experts in their field, with extensive experience in university teaching. They are ready to guide you towards success.

Personalized Program: We tailor each course to your specific needs, from understanding fundamental concepts to solving complex problems.

Total Flexibility: Choose the schedule that suits you best. Whether you are an active student or a professional, we adapt to your schedule.

Constant Support: You will benefit from continuous monitoring between classes to answer all your questions and concerns.

Quality Teaching Materials: We provide high-quality learning resources to support your progress.

Who can benefit from our courses?

High school students preparing for their baccalaureate or entrance exams to engineering schools.

University students pursuing a degree in mathematics, physics or engineering.

Professionals looking to acquire or deepen technical skills.

Join us today!

Excellence doesn't wait. Contact us now to book your first lesson. Together we will build a bright future based on a solid understanding of mathematics, physics and engineering.

Anh

4.88

(85)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Alonso

4.88

(85)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Jeremy

4.88

(85)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 5 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Adam

4.88

(85)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Abdeer

4.88

(85)

As an experienced teacher with a PhD in mechanical engineering, I offer specialized courses to master essential concepts in mechanical engineering:

Modules taught:
🔹 Continuous Media Mechanics (MMC): Introduction and in-depth study of the basics of continuous media mechanics, behavior laws, and practical applications.
🔹 Elasticity: Study of deformations and stresses in elastic solids, theory and resolution of complex problems.
🔹 Strength of Materials (RDM): Analysis and calculation of stresses, deformations, and dimensioning of mechanical structures.

Who are these courses for?
🎓 Students in preparatory classes, engineering schools, or technical faculties.
🏗️ Professionals wishing to strengthen their knowledge in mechanical engineering.

Why choose my courses?
✔️ Courses adapted to beginner to advanced levels.
✔️ Teaching based on concrete examples and typical exercises.
✔️ Personalized support for your projects, exams or competitions.
✔️ Clear and detailed course materials provided in each session.

Course organization:

Format: Individual or group lessons.
Modality: Online or in person (depending on your location).
Duration: Flexible depending on your objectives.

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Marcos

4.88

(85)

Beat the 15% TU Delft Acceptance Rate! Over the past 2 years, more than half of my students have successfully passed the selection process. To kick things off, I’m offering a 2-for-1 first class: we’ll build your personalized study strategy and complete your first full lesson in a 2 hour sessions for the price of 1!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 15 students for the entrance exam. The reviews left by the students show how satisfied they are with the classes!

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood. Near the exam, I will provide you with more than 1000 exam-type questions for you to get toned-up right before the real test!

I am looking forward to help you in your journey as an aerospace engineer!

Reza

4.88

(85)

This tutoring class is designed to support Mechanical Engineering students in mastering core concepts of thermodynamics. I cover key topics such as the First and Second Laws of Thermodynamics, energy conservation, entropy, thermodynamic cycles (Carnot, Rankine, Otto, Brayton), and the analysis of closed and open systems. Emphasis is placed on clear explanations, worked examples, and strategies for solving complex engineering problems.

Core Thermodynamics topics that I teach include:
• Basic Concepts: Systems (closed, open), properties, processes, and energy forms
• First Law of Thermodynamics: Energy conservation in closed and open systems
• Applications: turbines, compressors, nozzles, heat exchangers
• Properties of Substances: Phase changes, property tables, ideal gas law, P-v-T behavior
• Second Law of Thermodynamics: Heat engines, refrigerators, Carnot cycle, reversibility
• Entropy: Entropy changes, T-s diagrams, irreversibility
• Thermodynamic Cycles: Otto, Diesel, Rankine, Brayton, and vapor-compression cycles

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Intasar

4.88

(85)

I have graduated with a degree in chemical engineering from the University of Edinburgh, UK. I am also an Erasmus Mundus scholar with a master's in Analytical Chemistry from Uppsala University. Currently, I am pursuing a PhD in physical chemistry.

I have been tutoring since 2012 to fund my education expenses. I formally began tutoring in 2014 as part of my vocational training as a teacher in Ghana, funded by the University of Edinburgh. The formal training has taught me a lot about curriculum development, time management, and fusing my teaching methodology to my students’ needs. I have been tutoring in Physics, Chemistry, and Math, in person and online; the hybrid model has allowed me to reach out and teach students in 8 different countries. I have successful students from these past nine years who have not only commended my work ethic but can also stand testament to my enthusiasm.

My excellent academic career has nurtured in me a natural talent for teaching. My experiences have taught me how to tackle one problem at a time, and I believe that using this approach—paired with my unconventional examples that force students to think outside the box—I can truly provide an excellent understanding and explanation. My teaching methodology is based on two main things: skill development and adaptation. Initially, I create a skeleton of the most suitable methodology tailored to the preferred curriculum, after which, I adapt that lecture to the specific needs of the student based on their knowledge and grasp of the concepts. Second, I like to develop analytical and scientific ability along with knowledge in my students, and for that, I use a combination of resources in the form of worksheets, class tasks, and past papers. Last, I believe in the strong ethic of providing feedback to the parents, so that they are aware of their child’s progress.

Frequently Asked Questions:
Which subject(s) do you teach?
I teach math, mechanics, statistics, chemistry and physics. I also teach biology up to GCSE level.

When are you available? My timetable is quite flexible. I am happy to work weekdays, week evening and weekends.

Which ages and levels do you teach? The majority of my students are between the ages of 10-18, but I also teach college Students. I am also helping foundation and first year university students.

Which qualifications do you prepare your students for? GCSE, o-level, A/S-level, A-level, IB, School entrance exams and SATs

Describe your arrangements for online tutoring? I use Zoom online sessions since it has many tools and features specially designed for interactive and visual learning. I am fully equipped with modern gadgets for e-learning. I use Google drive and docs to share files.

Abdelrahman

4.88

(85)

We explain the information in several different ways, far removed from the usual methods.
Giving real-world examples of what is being taught
Ongoing practical follow-up with varying levels of questions
Psychological preparation for exams
Systematic linking of educational lessons
Providing visual content and real-life examples

Massimiliano

4.88

(85)

Struggling with your classes or upcoming exams?
I've been there too, and I can help with personalized one-to-one tutoring tailored to your needs. From one student to another, we'll focus on what you actually need to understand, improve, and succeed.

Abdelmalek

4.88

(85)

Master Industrial Control Systems (SCADA, DCS, IIoT) and automation through tailored, hands-on coaching based on real-world industrial projects! With over 10 years of international engineering, solution architecture, and technical business development experience working with major industry vendors

I offer practical courses designed for engineering students, university undergraduates, and professionals looking to upskill.

The pathway will be in 7 days to cover all basics in OT environnement :
Day 1 - Virtual Environment Preparation for OT projects
- Install Hypervisor on your workstation (A virtual machine).
- Create a Linux VM (Fedora Server).
- Configure 2 networks on the VM: one in NAT (internet access) and one in Host-Only Network (to isolate lab traffic).
- Install basic tools for OT
Day 2: Modbus PLC Simulation (Add 2 Server and test script client to connect)
- Implement Modbus PLC simulators and architecture overview
- Create PLC simulator scripts in src/plc-simulators/
- Add validation test script for Modbus connectivity
- Update Day 2 guide with detailed implementation steps and compatibility notes
Day 3: NGINX Load Balancer Configuration (Round Robin)
- Understand NGINX Stream Module
- Configure NGINX
- Verify and Load the Module
- Troubleshooting NGINX (Activate load balancing in layer 4 protocol, Set permission)
- Step-by-Step Load Balancer Validation
- Test Load Balancing (Round-Robin)
- Test Failover (Resilience)
Day 4 - Creation of the traffic generator (SCADA Client)
- TBD
Day 5 - Traffic capture and measurement with TShark
TBD
Day 6 - Advanced analysis and overload simulation
TBD
Day 7 - Grafana
-TBD
What we can cover together based on your goals:

4.88

(85)

Learn first-order and second-order differential equations, Laplace transforms, and engineering applications with practical examples. Differential Equations Comprehensive mathematics course for engineering students covering Calculus, Linear Algebra, Differential Equations, Numerical Methods, and Vector Calculus.

Yacine

4.88

(85)

As a student at Arts et Métiers in Metz (formerly CPGE PSI in Paris), I offer personalized support to help you overcome your difficulties or improve your skills. Having experience helping my peers, I can identify what's holding you back.
My method is based on listening, dialogue, and learning effective study methods (for science subjects or English immersion). Patient and persistent, my goal is to guide you step by step until that crucial "aha" moment that unlocks your full potential!