Mechanics -Introduction to statics and dynamics , forces and reactions

From 16 £ /h

Mechanics is an important subject for the science and Engineering students .The introductory topics and the applications of mechanics will be discussed in the classes. Solutions for tutorials will also be discussed based on students requirements

Location

Online from India

About Me

I am Bhoominathan
Qualification : ME in Aeronautical Engineering, BE in Mechanical Engineering
Teaching Experience: 16 years
Field of Specialization: Mechanics and Materials
Available for offline classes near medavakkam Chennai / online classes
Have experience in handling Engineering subjects for Mechanical and Aeronautical Engineering Students- Engineering Drawing/graphics, Engineering Mechanics, Mechanics and materials, Kinematics and Dynamics of machinery, Mechanical Vibrations, Composite Materials, Experimental stress analysis,
Expert in one-to-one tuition classes
Usage of advanced teaching methodologies and tools for both online and offline teaching
BB or ppt teaching with smart boards
A person with a passion for teaching and career development of students of next generation
feedback from old students can be collected by the learner
Produced best results in academics and received awards and accolades .
Best motivator for the students .

Education

Bachelor degree in Mechanical Engineering from Manonmaniam sundaranar University
Masters degree in Aeronautical Engineering from Madras Institute of Technology, Chennai, India

Experience / Qualifications

16 years of teaching experience in various Engineering colleges near Chennai and Chandigarh
Online teaching experience of 3+ years

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Student level

Beginner

Intermediate

Duration

60 minutes

The class is taught in

English

Tamil

Skills

Mechanical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Anh

4.64

(25)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Haider

4.64

(25)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ Structural engineering
✔ Design
✔ Test method and technique
✔ Measurement technology
✔ FEA
✔ Fluid mechanics
✔ Hydromechanics
✔ Structural mechanics
✔ Fluid mechanics
✔ Electric drives
✔ Fluid dynamics
✔ MS Office (Word, PowerPoint, Excel, Visio, Project, Access, Outlook)

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I'm looking forward to your messages.

Adam

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.64

(25)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Ahmd

4.64

(25)

Engineering drawings are used to communicate design ideas and technical information to engineers and other professionals throughout the design process. An engineering drawing represents a complex three-dimensional object on a two-dimensional piece of paper or computer screen by a process called projection.

Mohamed

4.64

(25)

Teaching All Engineer Courses for Mechanical Engineering Students which will suits also Mechanical Engineering Students, Electrical Engineering Students and Computer Engineering Students. It will include theoretical teaching lessons and practical teaching lessons and also include many software such as Matlab.

Mohamed

4.64

(25)

Hi,
I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success.

Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs.

Feel free to contact me for more information !

Yassmine

4.64

(25)

As a mechanical engineer, I offer tutoring in mathematics, physics and mechanical engineering, adapting each session to the specific needs of the student. My goal is to make these subjects clear and accessible while promoting understanding and practical application of concepts.

Yazan

4.64

(25)

As a private tutor, I focus on simplifying complex engineering and scientific concepts to enable students to fully understand the underlying principles, not just memorize formulas. I use the following:

Clear and organized explanations specifically designed for each topic.

Real-world engineering examples to link theory with practical applications.

Solve problems step by step to build strong analytical and mathematical skills.

Visual teaching tools such as diagrams, charts, and physical explanations of formulas.

Adaptive teaching that is tailored to the student's level, whether beginner or advanced.

Building confidence by establishing the fundamentals before moving on to more challenging concepts.

Sample lesson plan

Introduction and review (5 minutes)
A quick review of the previous material and key links.

Lesson objective (2 minutes)
A clear explanation of the objective of today's topic and its engineering importance.

Explanation of the concept (15 minutes)
The new concept is explained using diagrams, physical meaning, geometric examples, and intuitive logic.

Guided problem solving (15 minutes)
Working together on model issues to illustrate the correct methodology.

Independent training (10 minutes)
The student solves the problems independently while I provide feedback and correct misconceptions.

Summary and Notes (5 minutes)
Highlighting key concepts, clarifying errors, and recommending training materials.

What sets me apart as a private tutor

A deep understanding of engineering topics and the ability to explain them in simple and intuitive ways.

A strong focus on the fundamentals, to ensure the student understands the logic behind each equation.

Patience and clarity, to create a comfortable environment for asking questions.

Engineering-based teaching, linking each subject to practical applications in mechanics, fluids, thermodynamics, and others.

Organized and structured lessons with the ability to measure progress over time.

Who are these lessons for?

My lessons are ideal for:

Engineering students at universities who study:

Differential and Integral Calculus

Physics

Applied Mechanics

Material resistance

Engineering Mechanics (Statics and Dynamics)

Fluid Mechanics and Hydraulics

Thermodynamics and heat transfer

Technical college students who need support in basic engineering sciences.

Students who are preparing for exams, whether they are midterms, finals, or entrance exams for engineering colleges.

Learners who have difficulty solving problems or wish to strengthen their engineering fundamentals.

All levels, from beginners to advanced engineering students.

Mohtady

4.64

(25)

This lesson is aimed at engineering students and those interested in the field of mechatronics and practical applications, where basic and advanced concepts are presented in a simplified and smooth style that combines theoretical understanding and practical application.

The lesson will focus on explaining the ideas in a gradual way, starting from the basics and progressing to solving problems and real-world applications, using practical examples, practice exercises, and models from real projects to increase understanding and consolidate information.

Attention is also given to simplifying complex concepts, clarifying common mistakes, and providing effective methods for quick solutions, which helps the student achieve the best performance in both academic and practical application.

This lesson is suitable for beginners as well as those who have a background and wish to strengthen their skills and reach a professional level.

German

4.64

(25)

Struggling with calculus, mechanics, or electromagnetism?
Need to pass a tough course, prepare for your IB / A-Levels / Bachelor exam, or simply guarantee the highest grade?

📍 In-person in Vienna | 💻 Live online | 🔄 Hybrid model (you choose what works best)

🔥 Why learn with me?

MSc in Physics (not a peer tutor – a real expert).

4 years of private teaching experience with students aged 15–30: from high school finals to university bachelor exam preparation ("bachelor reparation").

Multilingual: English, Spanish, Italian – perfect for international students or those who want to learn science in another language.

Custom, dynamic materials – no boring lectures. Real-world examples, interactive simulations, and exam-style drills.

🎯 What you'll get:
✔️ Finally understand the logic behind formulas.
✔️ Pass with confidence – or aim for the top grade.
✔️ Study techniques that last beyond our sessions.

⚠️ Limited spots – I work with a small number of students to ensure real progress.
📲 Message me now and tell me your goal: exam prep, weekly tutoring, or an intensive bootcamp.

Yassir

4.64

(25)

If you are curious about robotics, Arduino, programming, or engineering and want to learn in a simple and practical way, this class is made for you.

Together, we will explore how electronic components work and learn step by step how to program Arduino boards using C++. Through fun hands-on projects, students will create systems using LEDs, sensors, motors, and other smart components used in real robotics projects.

My teaching style focuses on practice, creativity, and understanding rather than only theory. I aim to help students build confidence while learning how to solve problems and think like engineers.

I have participated in several robotics and STEM experiences, including FIRST Tech Challenge (FTC), World Robot Olympiad (WRO), and space-related programs and projects such as space camps and engineering activities focused on innovation and technology. These experiences helped me gain practical knowledge that I now share with students in an easy and engaging way.

I can also teach CATIA V5 for students interested in mechanical design, engineering projects, and 3D modeling. These lessons can help students better understand mechanical engineering concepts and learn how to design professional parts and assemblies used in real engineering projects.

This class is perfect for beginners and intermediate learners who want to start or improve their journey in robotics, technology, mechanical engineering, and space-related fields.

Zewdu

4.64

(25)

Hello! My name is Zewdu, and I am a Master's student in Global Production Engineering and Management at Warsaw University of Technology. I hold a Bachelor's degree in Mechatronics Engineering and have experience in engineering projects, research, and STEM education.
I offer personalized tutoring in Mathematics, Physics, Calculus, Mechanics, and Engineering-related subjects for secondary school, high school, and university students. My goal is to help students understand concepts clearly, improve problem-solving skills, and build confidence in their studies.
Lessons are adapted to each student's level and learning pace. Whether you need help with homework, exam preparation, assignments, SAT preparation or understanding challenging topics, I will provide clear explanations and practical examples to support your learning.
I welcome students of all levels I mentioned and look forward to helping you achieve your academic goals.

I offer lessons online to students worldwide and in person in Warsaw, Poland.

Lucas

4.64

(25)

I am a PhD researcher at the University of Oxford, with an MRes from the University of Cambridge and research experience with Rolls-Royce.

I enjoy helping students build confidence in engineering, physics, and mathematics through clear explanations and a supportive, personalised approach. Whether you are preparing for exams, working through challenging coursework, or simply looking to strengthen your understanding, lessons are tailored to your goals and learning style.

My aim is not only to help you achieve better results, but also to develop the problem-solving skills and intuition that make technical subjects more enjoyable and rewarding.