Statics explained from scratch | Fundamentals of forces and equilibrium (Statics)

Translated by GoogleSee original

From 18 £ /h

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Location

Online from Egypt

About Me

I have been working in the field of engineering for almost ten years, specializing in mechatronics engineering, and I hold a master's degree. During this time, I have worked on various practical projects and provided academic support to a large number of students with their coursework, graduation projects, and master's theses.
My teaching method is based on simplifying concepts and linking them to real-world applications, focusing on deep understanding rather than memorization. I explain each idea from its foundation in organized and clear steps, and I follow up with the student until they can apply it and solve problems independently.

Education

Faculty of Engineering, Mechatronics Department, Excellent with Honors
Over 10 years of practical experience in engineering and teaching
Teaching and academic support for engineering students in coursework, graduation projects, and master's theses.

Experience / Qualifications

Bachelor of Science in Mechatronics Engineering - Master of Science in Mechanical Engineering
Over 10 years of practical experience in engineering, teaching, and programming.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

Arabic

English

Skills

Mechanical engineering

Civil engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

4.64

(25)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.64

(25)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Haider

4.64

(25)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered (online) in

✔ Math

✔ Physics

✔ Technical mechanics (statics, strength theory, kinematics)

✔Technical drawing

✔ Machine elements

✔ Thermodynamics

✔ Fluid dynamics

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I am looking forward to hearing from you.

Anh

4.64

(25)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Adam

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.64

(25)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Pierre

4.64

(25)

I adapt to the profile of each intern or student according to their objective and level.
The goal is not to work endless hours, but to show how to be able to work alone or partially independently in a short time.
It is always a pleasure for me to be recognized in the street 15 years after classes, and to be thanked for having provided a real service to the person concerned.
This activity is a passion of mine that I have been pursuing since I was 16 years old.
I hope to be able to share it with you to prepare effectively, by significantly reducing your legitimate apprehension of exams.

Ali

4.64

(25)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Yassine

4.64

(25)

As a tenured professor of Engineering Sciences, I help students succeed in exams and competitive entrance exams. I teach in preparatory classes (MPSI, MP, PSI, etc.) and up to the undergraduate level. My method: understand the material, practice rigorously, structure your reasoning, and tackle well-chosen exercises and problems. Each session includes targeted exercises, methodological advice, and personalized follow-up. You will receive a video recording and an annotated PDF after each lesson. Lessons are held online via Google Meet, 7 days a week, with flexible scheduling. I am available between sessions to answer questions. Contact me for an initial discussion.

Aashish

4.64

(25)

Master Engineering Drawing, Technical Drawing and Engineering Graphics with a practical, step-by-step approach.

Are you a student who finds engineering drawing difficult to visualize? Do you want to understand orthographic projections, front/top/side views, sections, dimensions, scales, and 3D shapes instead of simply memorizing drawing procedures?

I provide friendly, patient and practical online coaching in Technical Drawing, Engineering Drawing, Engineering Graphics, CAD and Engineering Design for students from high school through university, as well as professionals who want to strengthen their technical drawing and design skills.

What You Will Learn

The classes are designed to develop both your drawing skills and your ability to visualize engineering objects in 2D and 3D.

Topics can include:

Engineering Drawing fundamentals and drawing conventions
Visualization of 2D and 3D geometric shapes
Orthographic projection
Front, Top, Side and Back views
First-angle and Third-angle projection
Isometric views and pictorial representation
Sectional views and sectional drawings
Hidden lines, centre lines and construction lines
Dimensions, annotations and engineering symbols
Scales and measurement
Geometrical constructions
Development of surfaces
Intersections of solids
Tolerances and basic fits
Engineering drawing standards and conventions
Reading and interpreting engineering drawings
Production-oriented technical documentation
Mechanical components and product drawings
Basic engineering design principles
From Hand Drawing to CAD and 3D Models

I also help students understand how traditional engineering drawing connects with modern Computer-Aided Design (CAD).

You can learn how a product or mechanical component can be:

Visualized → Sketched → Dimensioned → Created in CAD → Converted into a 3D Model → Prepared for Manufacturing / 3D Printing

Depending on your requirements, lessons can include AutoCAD, 2D drafting, 3D modelling and engineering design workflows.

The objective is not only to teach you which commands to use, but to help you understand why a drawing is created in a particular way and how engineers use drawings to communicate a design.

Practical, Student-Focused Teaching

My teaching approach is based on understanding through visualization and practice.

Instead of simply demonstrating a drawing, I explain:

How to visualize the object before drawing it
How to identify the different surfaces and views
How the front, top and side views are related
How to determine the required dimensions
How to construct the drawing step by step
How to avoid common drawing mistakes
How to interpret engineering drawings correctly
How the same concept is applied in CAD and real-world design

Lessons include worked examples, practical exercises and real engineering/product examples so that students can gradually develop confidence and independence.

Who Are These Classes For?

These lessons are suitable for:

High school students studying technical/engineering drawing
Diploma students
Mechanical Engineering students
Civil Engineering students
Architecture students
Industrial Engineering students
Product Design students
Manufacturing Engineering students
Other engineering students studying Engineering Graphics or Engineering Drawing
Students preparing for examinations
Beginners learning CAD and technical drawing
University students working on drawing or CAD projects
Professionals who want to refresh or improve their technical drawing skills

Beginners are welcome. No advanced prior knowledge is required.

Online & Interactive Lessons

All lessons are conducted online and interactively.

Depending on the topic, I can use:

Screen sharing
Live drawing demonstrations
CAD demonstrations
2D drafting
3D modelling
Step-by-step problem solving
Practical drawing exercises
Real-world engineering examples

You can bring your specific syllabus, textbook exercises, assignments, CAD projects or exam topics, and the lessons can be adapted to your requirements.

Learn to Think Like a Designer

Engineering drawing is more than producing a neat drawing on paper. It is a method of visualizing ideas, communicating designs and understanding how objects are constructed and manufactured.

My goal is to help you move from:

“I don't understand this shape.”

to

“I can visualize it, draw its views, add the required dimensions and understand how it would be represented in CAD and manufactured.”

Whether you are starting from zero, preparing for an examination, struggling with engineering graphics, learning CAD, or working on a design project, I will guide you step by step at your own pace.

Book a lesson and let's make Engineering Drawing and CAD easier, more visual and more practical.

Hakan

4.64

(25)

I offer clear and structured Calculus I and Calculus II lessons for university students, particularly those studying engineering, science, and other STEM subjects.

My aim is not only to help you solve problems, but also to understand the mathematical ideas behind the methods. I explain concepts step by step and connect calculus to practical applications in physics and engineering whenever useful.

Topics can include:

• Functions, limits, and continuity
• Derivatives and differentiation techniques
• Applications of derivatives and optimization
• Integrals and integration techniques
• Applications of definite integrals
• Sequences and series
• Parametric and polar functions
• Introduction to multivariable calculus
• Partial derivatives
• Engineering applications of calculus

Lessons can be adapted to your individual goals, whether you need help understanding a difficult topic, preparing for an exam, reviewing a course, or solving practice problems.

As a mechanical engineer with university-level teaching and laboratory experience, I regularly work with mathematics in subjects such as mechanics, thermodynamics, fluid mechanics, heat transfer, and computational engineering. This allows me to explain not only how a mathematical method works, but also why it is useful.

Lessons are interactive and tailored to your current level. Students are encouraged to ask questions throughout the lesson.

Mohamed

4.64

(25)

Teaching electrical engineering online to university students

I offer online private lessons for engineering college students, focusing on simplifying engineering concepts, solving problems step by step, and practicing exam and project questions.

I help students understand the material from the ground up instead of relying on memorization, using practical examples, illustrations and simulations when needed.

The subjects I teach include:

Electrical Circuits
Electrical Machines
- Electrical Power Systems
Power System Protection
Electrical Installation & Distribution
Energy Conversion
Renewable Energy Systems
High Voltage and High Voltage Engineering
- Transformer stations and substations
- Electronics and basic electronic circuits
- Basic Control Systems
Engineering mathematics used in electrical engineering

During the lecture, I focus on:

1. Explain the concept in a simple and organized way.
2. Derivation of important laws and equations.
3. Solve various examples and problems step by step.
4. Training the student on exam questions.
5. Explaining common mistakes and how to avoid them.
6. Use MATLAB/Simulink, ETAP and simulation when needed.
7. A comprehensive review before tests and exams.

Teaching method:

- Individual lectures or small online groups.
- Live and interactive explanation via Zoom or Google Meet.
- Sharing the screen and writing on the electronic whiteboard.
- The possibility of recording the lecture as agreed.
- Providing summaries and practice problems for review.

The goal: for the student to be able to understand the material, solve problems on their own, and prepare confidently for exams and engineering projects.

Alaaeldin

4.64

(25)

Learn PLAXIS 2D & 3D and Geotechnical Engineering with a PhD Researcher in France!

I am a PhD candidate in Geotechnical Engineering at the University of Lille, France, specializing in finite element modelling (FEM), soil–structure interaction, and advanced numerical simulations.

I offer personalized online lessons for civil engineering students, master's and PhD students, researchers, and practicing engineers.

What you can learn:

PLAXIS 2D & 3D
Getting started with PLAXIS and understanding the modelling workflow.
Geometry creation, soil layers, materials, and boundary conditions.
Soil constitutive models and parameter selection.
Mesh generation and staged construction.
Foundation settlement and soil–structure interaction.
Retaining walls, excavations, and underground structures.
Results interpretation and model validation.

Geotechnical Engineering

Soil Mechanics and Foundation Engineering.
Earth pressure and retaining structures.
Settlement and bearing capacity.
Soil–structure interaction.
Personalized Learning

Lessons are adapted to your experience, from beginner to advanced level. We can work through practical examples, discuss theoretical concepts, or review your own numerical models step by step.

My goal is to help you understand both the engineering principles and their practical implementation in numerical modelling software.

Lessons are available online in English, Arabic, or French.

Feel free to contact me to discuss your learning objectives and arrange a personalized lesson!

Norbert

4.64

(25)

Ik stem mijn aanpak volledig af op jouw behoeften.

Samen werken we toe naar wat jij nodig hebt, of het nu gaat om lesstof uit studieboeken of om specifieke praktische vaardigheden.

Tijdens de proefles bespreken we je doelen en stellen we een plan op. Indien nodig passen we dat gaandeweg samen aan.