Technical mechanics 2 - elasto-statics/strength theory - tutoring for students

Translated by GoogleSee original

From 26 £ /h

I will help you prepare for your elastostatics exam, work through tasks with you step by step that you don't know what to do, or answer your questions about elastostatics/strength theory. Through my work as a tutor for elastostatics at the university, I have a large collection of tasks and can support you with exercises for your own study.

Location

Online from Germany

About Me

I have already accompanied several tutors in metal technology or mechanical engineering through their exams.
The fun and quality of the lessons are my top priority.

Education

I studied plastic engineering at the Darmstadt University of Applied Sciences and graduated with a Master of Engineering - mechanical engineering/plastics technology.
I did my in-depth study and master's thesis in the area of fiber composite plastics (carbon, glass and natural fibers).

Experience / Qualifications

Tutor for technical mechanics (statics and elastostatics) and technical communication (technical drawing) at the university

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

German

English

Skills

Mechanical engineering

Engineering

Civil engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Technical Mechanics 1 - Statics - tutoring for students

26 £ /h

I'll help you prepare for your statics exam, work through tasks with you step by step that you don't know what to do, or answer your questions about statics. Through my work as a tutor for statics at the university, I have a large collection of tasks and can support you with exercises for your own study.

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Matías

4.64

(25)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Alonso

4.64

(25)

I am a Full Professor of Mechanical Engineering with 30 years of experience in areas such as Strength of Materials, Stability, Physics (Kinematics and Dynamics), Statics, Elasticity, Solid Mechanics, Machine Elements, Stress Analysis, Structures and Advanced Materials Mechanics . I emphasize teaching through problem solving and practical applications.
The Strength of Materials classes include topics such as: Stress analysis. Axial load, bending, Torsion, Transverse load, Combined stresses, Stress transformation, Energy methods, Calculation of deflections in beams, statically indeterminate problems, buckling, shear center, compound bending and asymmetric bending, Castigliano's theorem, Mohr's method , Virtual work, Creep and Fracture Criteria, etc.

Jeremy

4.64

(25)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 6 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Adam

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.64

(25)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Roland

4.64

(25)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. As it is highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A major part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduate Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of experience and knowledge of the program to help you out with the right preparation to get in. Over the last four years, I have helped tens of students secure a spot! Moreover, I offer a free personalised lesson plan for each student, which is fully based on the admission syllabus and past exams, to ensure an even higher chance of admission for each student.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will become more effective and accurate. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, the city of Delft, what to expect from the study and whether it is the right fit for you.

Rayane

4.64

(25)

Mechanical Engineering courses can be hard to understand, considering that most of the subjects require a deep understanding of the laws governing any phenomena, intense mathematical skills, and the ability to visualize concepts and ideas.
I am here to help you get through them as smoothly as possible, with one-on-one Tutoring sessions, where we will get to dive deeper into any doubts and questions you might have, helping you ace your exams and finish any course smoothly.

أحمد

4.64

(25)

Hello everyone and have a nice day,

As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him.

Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen.

For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an.

There is a lot of expertise in this article, too:
- Matlab, Simulink,
- S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation,
- Electrical drives and E-Motoren,
- STM32 Microcontroller,
- Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme,
- Power electronics / Leistungselektronik,
- Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten,
- ...

There is a lot of contact with you.

Very nice greetings

يحيى

4.64

(25)

Lesson:
This course is a cornerstone for any student aspiring to excel in scientific and technological fields. The lesson focuses on transitioning from traditional mathematics to the world of "instantaneous change" through the study of limits, derivatives, and their vital applications.
In this course you will learn:
• A deep understanding of Limits and Continuity.
• Mastering the rules of differentiation for various functions (trigonometric, exponential, and logarithmic functions).
• Applying differentiation to solve real-world problems such as finding maximum, minimum, and time-related rates.
• A preliminary introduction to the concept of integration and spaces.
This content is designed to be a practical and comprehensive guide to help you excel academically and pass exams with high efficiency.
):
Calculus I serves as the bridge between school mathematics and advanced university science. This course is specifically designed to enable students to understand the "language of movement and change" that governs our world, and it is a fundamental and essential requirement for engineering, artificial intelligence, and science students at top universities nationwide.
What will the student learn on this academic journey?
• The philosophy of limits and continuity: We will break the barrier of fear of limits, to learn how to predict the behavior of functions at critical points and how to determine the continuity of curves, which is a vital basis for understanding the stability of geometric systems.
• The Art of Derivative: The student will practice extracting the instantaneous rate of change using advanced differentiation rules (Product, Quotient, and Chain Rules), with a strong focus on trigonometric and logarithmic functions that appear frequently in EmSAT exams.
• Real-world applications (Optimization): We will not be satisfied with paper-based solutions, but will learn how to use differentiation to find optimal solutions (maximum and minimum values), such as determining the shortest path or achieving the highest technical efficiency at the lowest possible cost.
• Introduction to Integration: We will lay the foundation for the science of integration by understanding the inverse relationship between differential and integral calculus, which will fully prepare the student for the Calculus 2 course.
Why choose this lesson?
We don't just solve equations; we aim to build an "analytical mindset." This approach simplifies complex concepts, connects them to practical realities, and equips students with smart strategies for tackling the most frequently asked exam questions in UAE university curricula, ensuring not just success, but excellence and an A grade.
Additional information for the student (more detailed):
• Prerequisites: The student should preferably have a good understanding of the basics of algebra and the ability to solve equations and inequalities.
• Required tools: A scientific calculator (preferably advanced models such as those allowed in EMAST), and a graph book to track the behavior of the curves.
• Session approach: We follow a strict and organized system of explanation based on progression from easy to difficult, while providing training examples that simulate actual final exams.

Baia

4.64

(25)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Yassine

4.64

(25)

Professeur agrégé de Sciences de l'ingénieur, j’aide élèves et étudiants à réussir examens et concours. J’interviens aux classes préparatoires (MPSI, MP, PSI...) et jusqu’à l’université (Licence ). Ma méthode : comprendre le cours, pratiquer avec rigueur, structurer le raisonnement et attaquer des exercices et problèmes bien choisis. Chaque séance inclut exercices ciblés, conseils méthodologiques, et suivi personnalisé. Vous recevez un enregistrement vidéo plus un PDF annoté après chaque cours. Cours en ligne via Google Meet, 7 jours sur 7, avec flexibilité horaire. Je reste joignable entre les séances pour répondre aux questions. Contactez-moi pour un premier échange.

Julien

4.64

(25)

In-depth study of mathematical concepts up to post-baccalaureate level.

Application of problem-solving methods to engineering sciences.

Coaching to find YOUR learning method and succeed in all your exams

Computer skills refresher course

Learning 3D modeling and engineering software

Fares

4.64

(25)

### Courses in Mathematics, Physics, Chemistry and Engineering Sciences

As an engineering student in **mechatronics and instrumentation**, I offer private lessons tailored to the level and objectives of each student, **from middle school to higher education**.

My approach is progressive, clear, and geared towards understanding. The goal is to enable the student to **understand the concepts, master the problem-solving methods, and gradually gain autonomy**, rather than simply memorizing formulas.

**Mathematics:** algebra, functions, derivatives, integrals, differential equations, matrices, probability and statistics, with exercises adapted to the student's level.

**Physics and Chemistry:** mechanics, electricity, electromagnetism, thermodynamics, waves and physical phenomena, as well as the basics of chemistry. Concepts are explained through examples and concrete applications.

**Mechanics:** kinematics, statics, dynamics, energy, strength of materials, mechanical systems and modeling.

**Electricity and Electrotechnics:** electrical circuits, fundamental laws, direct and alternating current, electrical power, three-phase systems, electrical machines and basics of electrotechnics.

**Electronics:** electronic components, diodes, transistors, amplifiers, analog and digital circuits, as well as the basics of embedded systems.

My background in **mechatronics engineering and instrumentation** allows me to link different disciplines and offer a concrete approach through examples from **industry, automation, mechanical and electrical systems and instrumentation**.

Depending on the needs, the courses can be devoted to **understanding the course material, exercises, preparing for exams and tests, refresher courses or further study**.

Each session is tailored to the student's level in order to gradually build an effective working method and genuine autonomy.

Stéphane

4.64

(25)

As a civil engineer with an EPFL degree, I have been working in a design office since 2020: excavations, retaining walls, foundations, numerical modeling, and site supervision. I mentor junior engineers and interns in this role, and I write reports explaining these calculations to clients who are not engineers.

I support students from EPFL, HES and vocational schools in the branches that filter: statics, strength of materials, reinforced concrete, soil mechanics and foundations.

We work on your past exams and series. For geotechnics and foundations, I show you how these calculations are actually carried out in the office and according to which standards, which makes the material much more understandable than a formula learned by heart.

I also cover technical professional maturity and preparation for admission to a University of Applied Sciences.

Tools I use daily: PLAXIS, GEO5, K-REA, AutoCAD and reading execution plans.

Online courses with a shared whiteboard, or in person in the Neuchâtel region.