Engineering sciences (preparatory classes, bachelor's, master's and high school)

Translated by GoogleSee original

From 20 £ /h

Supervision of
industrial projects
TIPE for preparatory classes
Bac + levels ....
field: mechanical, electrical, electromechanical and industrial engineering
The realization and follow-up of the end-of-study industrial project with software simulations

Location

Online from Morocco

About Me

Associate Professor and Doctor of Industrial Engineering Sciences and Mechanical Engineering and Artificial Intelligence
with an experience of more than 15 years in the classroom as a teacher, I teach courses in:
technical drawing
mechanical Engineering
electrical engineering
mechanical engineering
3D software and simulation

Education

PhD in mechanical engineering and artificial intelligence
Associate professor in industrial engineering sciences and mechanical engineering
master in mechanical engineering
baccalaureate in electronics

Experience / Qualifications

15 years as a teacher
in high school and in preparatory classes for the Grandes Ecoles of engineers with courses provided in higher education

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

120 minutes

The class is taught in

French

English

Arabic

Skills

Project management

Industrial engineering

Mechanical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Technology (Technical drawing, information chain, energy chain.........)

18 £ /h

Associate Professor and Doctor of Industrial Engineering Sciences and Mechanical Engineering and Artificial Intelligence
provides courses in:
Systems Engineering:
 Functional Analysis, SysML, Technical Drawing
Modeling of multi-technical systems:
 Material modeling
 Modeling of structures and mechanisms
 Modeling of energy systems
 Order modeling
Systems design:
 Description tools used in the design phase, system engineering, characterization of a part and
of a mechanism
Systems mechanics:
 General theorems
 Energy approach
 Harmonic study
 Thermodynamics
Industrialization:
 Product Material Process Relationship
 Process optimization
 Continuous improvement, maintenance and production management, Quality and control
Automatique :
 Automation and control of systems
Computer science :
 MS Office, SolidWorks, Solid Edge, Matlab, ANSYS, Digimat, ...

Engineering Sciences, and Technology (all levels)

19 £ /h

Engineering science and mechanical engineering
additional courses in preparatory classes, high school and higher
Systems mechanics:
 General theorems
 Energy approach
 Harmonic study
 Thermodynamics
Industrialization:
 Product Material Process Relationship
 Process optimization
 Continuous improvement, maintenance and production management, Quality and control
Automatique :
 Automation and control of systems

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Haider

4.64

(25)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring / support is offered in

✔ High school graduation exam preparation
✔ Bachelor's thesis
✔ Master's thesis
✔ Thesis
✔ Project work
✔ Housework
✔ Dissertation
✔ Construction project
✔ Control engineering
✔ Electrical engineering
✔ MS Office applications

+ other subjects on request

When contacting please
Study education
notify!

Adam

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.64

(25)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Paloma

4.64

(25)

Consulting of technical drafting, 3D Sketchup, Autocad, Helping as Senior architect, with experience with construction and project designer

Project consulting, technical documentation in AutoCAD or SketchUp, renderings in Lumion. I have experience in construction and project management.

Salomé

4.64

(25)

A 32-year-old university graduate, management engineer, with 8 years of professional experience offers her teaching services for LEAN management and PROJECT management methodologies.

1H or 1H30 training depending on your current knowledge
For adults - private or company
My training is identical to the official certification and gives you all the essential notions to use it in your working life

Video training for 1 student - On site for groups (decreasing price per person and extended duration)

Feel free to contact me for more information !
See you soon

Dr.Ibrahim

4.64

(25)

This comprehensive course is designed to equip participants with the knowledge and practical skills needed to excel in facility management. Covering the core principles of planning, operating, and maintaining facilities, the program emphasizes efficiency, safety, and sustainability in managing physical assets and services.

Learners will explore key areas such as maintenance strategies, space planning, building systems, health and safety compliance, energy management, and vendor coordination. Real-world case studies and hands-on exercises will help participants understand how to balance cost control, service quality, and environmental responsibility while ensuring smooth day-to-day operations.

The course also highlights the role of facility managers as strategic partners in business success — bridging people, processes, and technology to create safe, productive, and sustainable work environments.

By the end of the program, participants will be able to implement best practices in facility operations, develop preventive maintenance plans, ensure regulatory compliance, and manage resources effectively. This class is ideal for aspiring facility managers, operations supervisors, engineers, and professionals responsible for managing buildings, campuses, or corporate facilities.

Omayma

4.64

(25)

Personalized support for students, freelancers and entrepreneurs wishing to succeed in their IT projects.

Help with:

Project structuring

Technology choices

Specifications

Code correction and improvement

University projects (final year projects, final year projects, dissertations)

Finalization and delivery of the project

يحيى

4.64

(25)

Lesson:
This course is a cornerstone for any student aspiring to excel in scientific and technological fields. The lesson focuses on transitioning from traditional mathematics to the world of "instantaneous change" through the study of limits, derivatives, and their vital applications.
In this course you will learn:
• A deep understanding of Limits and Continuity.
• Mastering the rules of differentiation for various functions (trigonometric, exponential, and logarithmic functions).
• Applying differentiation to solve real-world problems such as finding maximum, minimum, and time-related rates.
• A preliminary introduction to the concept of integration and spaces.
This content is designed to be a practical and comprehensive guide to help you excel academically and pass exams with high efficiency.
):
Calculus I serves as the bridge between school mathematics and advanced university science. This course is specifically designed to enable students to understand the "language of movement and change" that governs our world, and it is a fundamental and essential requirement for engineering, artificial intelligence, and science students at top universities nationwide.
What will the student learn on this academic journey?
• The philosophy of limits and continuity: We will break the barrier of fear of limits, to learn how to predict the behavior of functions at critical points and how to determine the continuity of curves, which is a vital basis for understanding the stability of geometric systems.
• The Art of Derivative: The student will practice extracting the instantaneous rate of change using advanced differentiation rules (Product, Quotient, and Chain Rules), with a strong focus on trigonometric and logarithmic functions that appear frequently in EmSAT exams.
• Real-world applications (Optimization): We will not be satisfied with paper-based solutions, but will learn how to use differentiation to find optimal solutions (maximum and minimum values), such as determining the shortest path or achieving the highest technical efficiency at the lowest possible cost.
• Introduction to Integration: We will lay the foundation for the science of integration by understanding the inverse relationship between differential and integral calculus, which will fully prepare the student for the Calculus 2 course.
Why choose this lesson?
We don't just solve equations; we aim to build an "analytical mindset." This approach simplifies complex concepts, connects them to practical realities, and equips students with smart strategies for tackling the most frequently asked exam questions in UAE university curricula, ensuring not just success, but excellence and an A grade.
Additional information for the student (more detailed):
• Prerequisites: The student should preferably have a good understanding of the basics of algebra and the ability to solve equations and inequalities.
• Required tools: A scientific calculator (preferably advanced models such as those allowed in EMAST), and a graph book to track the behavior of the curves.
• Session approach: We follow a strict and organized system of explanation based on progression from easy to difficult, while providing training examples that simulate actual final exams.

Massimiliano

4.64

(25)

Struggling with your classes or upcoming exams?
I've been there too, and I can help with personalized one-to-one tutoring tailored to your needs. From one student to another, we'll focus on what you actually need to understand, improve, and succeed.

Abdelmalek

4.64

(25)

- Modbus Protocol Introduction
- Modbus Frame Structure & Byte Analysis
- Modbus Exception Handling & Error Codes

Each module in this series is structured with core learning content followed by two mandatory practical components:
Challenge: A hands-on troubleshooting or design scenario to test your practical skills.
Audit: A checklist and verification quiz to ensure full mastery before moving to the next section.

Vivek

4.64

(25)

Bypass the textbook. Learn how ESG, Carbon Finance, and Environmental Management operate in the real world using live corporate case studies.

Are you trying to break into the booming sustainability sector, or do you need to master complex environmental frameworks for your university exams? The biggest gap in ESG education today is that it relies on outdated theory instead of actual industry practice.

I am an active Corporate Strategist and Deputy Manager directing large-scale, multi-million-dollar climate finance and ecosystem restoration portfolios. As a PMI Six Sigma Green Belt certified professional, my daily work involves aligning massive corporate projects with Science Based Targets (SBTi) and designing carbon offset models under Verra's Verified Carbon Standard (VCS).

In this class, we bring the boardroom and the field directly to your screen. We will analyze real corporate sustainability reports, build GIS-based carbon accounting models, and evaluate live ESG compliance.

➤ CORE TOPICS WE CAN COVER:

Carbon Markets & Climate Finance: Deep dive into carbon offsetting, Verra VCS methodologies (including VM0047 ARR), and Lifecycle Assessments (LCA).

ESG Compliance & Reporting: Navigating CSRD, ESRS, materiality assessments, and detecting corporate greenwashing.

Environmental Science & Ecology: Practical applications of agroforestry, Miyawaki afforestation, and soil organic carbon analysis.

Project Management & Execution: Applying PMI principles to corporate sustainability, budget optimization, and stakeholder alignment.

➤ MY TEACHING APPROACH:
I design 100% customized, data-driven curriculums. I do not use generic platform-provided content. Whether you need structured mock exams for your academic modules or a comprehensive career-mentorship program to transition into the ESG sector, we will build a roadmap tailored to your exact goals.

Send me a message with your current learning objectives, and let's book a session to start building your strategic edge in the sustainability sector.

Ecole

4.64

(25)

✅You have a project, an idea, or an ambition, but you're wondering: Where do I start? Who do I contact? How do I present my project? What strategy should I adopt? How do I convince others, negotiate, and move things forward effectively? ...

✅I support you in the construction and development of your project, from A to Z, by building with you the tools, techniques, methods, strategies to face the different challenges, to structure your approach and above all to adopt the right approach to each situation and each interlocutor.

✅ Concrete, strategic and personalized support

Together, by your side, at every stage, we work in particular on:

✔️ Clarifying your ideas and structuring your project and objectives
✔️ Defining your coherent and realistic strategy, as well as the different stages and your priorities
✔️ Identifying the right contacts and departments and coordinating with the various stakeholders: adapting your message according to each contact person, clients, partners, investors, suppliers, teams, administrations, etc.
✔️ The way to approach each person according to their role, interests and challenges
✔️ Preparing for your meetings, discussions and presentations, arguments, and files
✔️ Communication strategy, persuasion and negotiation techniques
✔️ Anticipate objections, blockages, resistance, difficulties and complex situations
✔️ Methods and tools to move your project forward effectively
✔️ Adapting your posture and communication according to the context
✔️ Ensure monitoring and adjustment of the strategy as progress is made
(...)

The goal is not just to give you recommendations, but to guide you step by step to kickstart the momentum of a project. We'll cover how to interact with the right people, how to avoid common mistakes, how to overcome obstacles, and how to choose the most effective method to achieve your objective.

Every project is different. Every stakeholder has their own expectations, constraints, interests, and ways of working. That's why we work with a customized approach, combining strategy, communication, negotiation, understanding of stakeholders, and concrete methods of action.

You are no longer alone with your project. You benefit from personalized support to know, at each stage:

What to do. In what order. With whom. How to approach it. How to present your request. How to convince. And how to move your project forward to its completion.

Comprehensive strategic and operational support to transform an idea or objective into a concrete action plan and tangible results. We help you gain a broader perspective on your project while providing hands-on guidance throughout its implementation. From the initial concept to final execution, we work together to develop a clear strategy, effective communication, and an action plan tailored to your specific goals.

Whether you are an entrepreneur, project leader, freelancer or in the launch phase, the idea is to transform a sometimes complex or scattered idea into a structured, coherent, convincing and feasible project.

✅ THE TRAINER - TEACHER CONSULTANT
A graduate of a prestigious European business school and an Ivy League university in the United States, he combines academic rigor with modern teaching methods. With over 18 years of experience in Europe and North America, he has taught at prestigious international institutions (both public and private), and regularly speaks in Switzerland, France, Belgium, Luxembourg, and Canada, as well as at various forums and conferences.

A recognized specialist, he offers personalized and accessible support, based on active listening, a proven methodology, and tailored teaching methods. His approach combines customization, efficiency, and professionalism for rapid, visible results.

✅ LOCATIONS:
-Switzerland (Geneva, Lausanne, Fribourg, Zurich, Neuchâtel, Lugano, Basel, Bern, Lucerne),
-Belgium (Brussels, Antwerp, Charleroi, Liège),
-Luxembourg,
-On request: France (Paris, Lyon) and Canada (Montreal).

-Currently, we primarily use videoconferencing, a highly popular format: it offers the same quality as in-person meetings, flexible organization, time savings, flexibility, comfort, and an eco-friendly approach. Content, notes, and recommendations are shared directly via a dedicated chat.

➤ Languages: French and English.

➤ Reduced and stable fees, accessible without compromising on quality.

➤ Gift vouchers available all year round.

➤ Schedules defined together according to your constraints.

➤ 100% tailor-made program, adapted to each need.

➤ Noticeable progress from 2 sessions (2026 study).

✅ Why choose this training?
-International expertise at the service of your objectives.
-Personalized sessions with concrete tools.
-A lively, interactive and results-oriented approach.
-A motivating and supportive environment, fostering confidence and rapid progress.
-Tangible results in just a few sessions.

Derek

4.64

(25)

Patient, practical tuition in Maths, Physics and Engineering Science from a mechanical engineer and further-education lecturer. I support Scottish National, Higher and Advanced Higher courses, GCSE learners throughout England, college and university students, apprentices and adult learners. Lessons are tailored to your level and goals, with calculations explained step by step, regular checks for understanding, revision planning, exam technique and real-world engineering examples. Topics can include algebra, trigonometry, calculus, statistics, mechanics, thermodynamics, fluid mechanics, electrical circuits and applied engineering calculations. I hold a Bachelor’s Degree in Mechanical Engineering, have over 25 years of engineering experience, five years of teaching experience, and a current PVG disclosure. Tuition is available online and in person in Glasgow, Monday to Saturday.

Aashish

4.64

(25)

Master Engineering Drawing, Technical Drawing and Engineering Graphics with a practical, step-by-step approach.

Are you a student who finds engineering drawing difficult to visualize? Do you want to understand orthographic projections, front/top/side views, sections, dimensions, scales, and 3D shapes instead of simply memorizing drawing procedures?

I provide friendly, patient and practical online coaching in Technical Drawing, Engineering Drawing, Engineering Graphics, CAD and Engineering Design for students from high school through university, as well as professionals who want to strengthen their technical drawing and design skills.

What You Will Learn

The classes are designed to develop both your drawing skills and your ability to visualize engineering objects in 2D and 3D.

Topics can include:

Engineering Drawing fundamentals and drawing conventions
Visualization of 2D and 3D geometric shapes
Orthographic projection
Front, Top, Side and Back views
First-angle and Third-angle projection
Isometric views and pictorial representation
Sectional views and sectional drawings
Hidden lines, centre lines and construction lines
Dimensions, annotations and engineering symbols
Scales and measurement
Geometrical constructions
Development of surfaces
Intersections of solids
Tolerances and basic fits
Engineering drawing standards and conventions
Reading and interpreting engineering drawings
Production-oriented technical documentation
Mechanical components and product drawings
Basic engineering design principles
From Hand Drawing to CAD and 3D Models

I also help students understand how traditional engineering drawing connects with modern Computer-Aided Design (CAD).

You can learn how a product or mechanical component can be:

Visualized → Sketched → Dimensioned → Created in CAD → Converted into a 3D Model → Prepared for Manufacturing / 3D Printing

Depending on your requirements, lessons can include AutoCAD, 2D drafting, 3D modelling and engineering design workflows.

The objective is not only to teach you which commands to use, but to help you understand why a drawing is created in a particular way and how engineers use drawings to communicate a design.

Practical, Student-Focused Teaching

My teaching approach is based on understanding through visualization and practice.

Instead of simply demonstrating a drawing, I explain:

How to visualize the object before drawing it
How to identify the different surfaces and views
How the front, top and side views are related
How to determine the required dimensions
How to construct the drawing step by step
How to avoid common drawing mistakes
How to interpret engineering drawings correctly
How the same concept is applied in CAD and real-world design

Lessons include worked examples, practical exercises and real engineering/product examples so that students can gradually develop confidence and independence.

Who Are These Classes For?

These lessons are suitable for:

High school students studying technical/engineering drawing
Diploma students
Mechanical Engineering students
Civil Engineering students
Architecture students
Industrial Engineering students
Product Design students
Manufacturing Engineering students
Other engineering students studying Engineering Graphics or Engineering Drawing
Students preparing for examinations
Beginners learning CAD and technical drawing
University students working on drawing or CAD projects
Professionals who want to refresh or improve their technical drawing skills

Beginners are welcome. No advanced prior knowledge is required.

Online & Interactive Lessons

All lessons are conducted online and interactively.

Depending on the topic, I can use:

Screen sharing
Live drawing demonstrations
CAD demonstrations
2D drafting
3D modelling
Step-by-step problem solving
Practical drawing exercises
Real-world engineering examples

You can bring your specific syllabus, textbook exercises, assignments, CAD projects or exam topics, and the lessons can be adapted to your requirements.

Learn to Think Like a Designer

Engineering drawing is more than producing a neat drawing on paper. It is a method of visualizing ideas, communicating designs and understanding how objects are constructed and manufactured.

My goal is to help you move from:

“I don't understand this shape.”

to

“I can visualize it, draw its views, add the required dimensions and understand how it would be represented in CAD and manufactured.”

Whether you are starting from zero, preparing for an examination, struggling with engineering graphics, learning CAD, or working on a design project, I will guide you step by step at your own pace.

Book a lesson and let's make Engineering Drawing and CAD easier, more visual and more practical.