High School: ENGINEERING SCIENCE courses at home or online - Saint-Denis

Translated by GoogleSee original

High School: ENGINEERING SCIENCE courses at home or online

From 18 £ /h

I am a 41-year-old mechanical design and structural calculation engineer.
I offer private lessons at college and high school level in Engineering Sciences as well as in the following subjects: Mathematics; Chemical Physics ; Mechanical ; Technology; Digital Sciences and I offer primary-college courses in French, English and Spanish.
I am willing to pick up the kids after school to continue with homework or lessons.

My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on the know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media → I have acquired great rigor, particularly in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have foreign students.

Extra information

- Provide a filing cabinet and perforated sheets; or one or more notebook.
- Provide sheets of drafts and a quick marker.

Location

Online from Reunion

About Me

Engineer by training, with a post-BAC course in Preparatory Classes (CPGE). I cumulate two Masters level diplomas, a doctoral student and 9 years of professional engineering experience in the field of calculation and training. My goal is to become a professor with CAPES, while waiting for my diploma, I wish to teach in a private setting by private lessons in the subjects I master:
- Mathematics
- Chemical Physics
- Engineering Sciences
- Mechanical
- Technology
- Digital Sciences

In my professional career, I trained engineers and supervised trainees in calculation methods on material physics with advanced mathematics. During my sessions, I demonstrate clarity, efficiency and impact on people with an education recognized by my peers. Added to this is good group management, time and priorities. Finally, I regularly supervised and shared my knowledge on various and varied subjects with young people, which I greatly appreciate, within the framework of my extra-professional activities.

Education

BAC S option SI 2003
Mechanical Design Engineer (Double specialty: technological innovation and product development) at UTBM (Belfort BAC + 5) 2009 with semester in Spanish in Argentina
Research Master in Mechanical Design at UJF (Grenoble 2010)
CIFRE thesis in knowledge management at UJF / INPG / Lab G-SCOP (Grenoble 2013) (not obtained by bankruptcy of the company ANTECIM)

Experience / Qualifications

Home courses successfully for neighbors.
Baby-sitting of my godchild from 6 months to 2 years old and my 4 neighbors from 2 years to 12 years old for 4 years.
My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media (video / projector / etc.) → J have acquired great rigor in particular in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have students strangers.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

French

English

Spanish

Skills

Computer engineering

Mechanical engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

College-High School: PHYSICS-CHEMISTRY course at home or by video

12 £ /h

I am a 41-year-old mechanical design and structural calculation engineer.
I offer private lessons at college and high school level in Physics and Chemistry as well as in the following subjects: Mathematics; Engineering Sciences ; Mechanical ; Technology; Digital Sciences and I offer primary-college courses in French, English and Spanish.
I am willing to pick up the kids after school to continue with homework or lessons.

My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on the know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media → I have acquired great rigor, particularly in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have foreign students.

Middle School-High School: MATHEMATICS lessons via video (webcam)

12 £ /h

I am a 41-year-old mechanical design and structural calculation engineer.
I offer private lessons at college-high school level in Mathematics but also in the following subjects: Physics-Chemistry; Engineering Sciences ; Mechanical ; Technology; Digital Sciences and I offer primary-college courses in French, English and Spanish.
I am willing to pick up the kids after school to continue with homework or lessons.

My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on the know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media → I have acquired great rigor, particularly in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have foreign students.

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

My extensive teaching experience covers a wide range of engineering courses, including:

- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.

- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.

- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.

- CAD/CAM Software: Autocad, Solidworks.

- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.

My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Matías

4.64

(25)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Rayane

4.64

(25)

Mechanical Engineering courses can be hard to understand, considering that most of the subjects require a deep understanding of the laws governing any phenomena, intense mathematical skills, and the ability to visualize concepts and ideas.
I am here to help you get through them as smoothly as possible, with one-on-one Tutoring sessions, where we will get to dive deeper into any doubts and questions you might have, helping you ace your exams and finish any course smoothly.

Ali

4.64

(25)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

أحمد

4.64

(25)

Hello everyone and have a nice day,

As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him.

Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen.

For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an.

There is a lot of expertise in this article, too:
- Matlab, Simulink,
- S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation,
- Electrical drives and E-Motoren,
- STM32 Microcontroller,
- Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme,
- Power electronics / Leistungselektronik,
- Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten,
- ...

There is a lot of contact with you.

Very nice greetings

Venkateswarlureddy

4.64

(25)

I am an Analog IC Design Engineer with strong academic and practical experience in integrated circuit design. During my master’s, I published two conference papers in the field of analog and power management circuits. Currently, I am working as an Analog IC Design Engineer, focusing on developing circuits such as operational amplifiers, current mirrors, bandgap references, and LDOs. My teaching approach blends solid theoretical foundations with real-world design practices, making complex concepts intuitive and industry-relevant. Whether you are a beginner or an advanced learner, I can guide you from fundamentals to hands-on design methodologies.

Yomna

4.64

(25)

This course explains how air interacts with bodies, from airfoils to aircraft.

Topics Covered:

Aerodynamic forces and moments
Airfoil theory and lift generation
Drag and pressure distribution
Subsonic and compressible aerodynamics
Boundary layers and flow separation

Applications:

Aircraft and drones
Automotive aerodynamics
Wind and performance analysis

Pallavi

4.64

(25)

Learn Python with a structured, hands-on approach! Whether you are a absolute beginner looking to start coding, a student needing help with coursework, or a professional aiming to automate tasks, these lessons are tailored for you.What we will cover:
Core Fundamentals: Variables, loops, functions, and data structures.Object-Oriented Programming: Building reusable and clean code.Real-World Projects: Creating scripts, data analysis, or web scraping based on your goals.

Problem Solving: Learning how to debug and think like a programmer. Lessons are highly interactive. We will write code together from day one, and you will receive practical exercises after every session to build your confidence.

Zeyad

4.64

(25)

This course is for students just starting out in CS.

We'll cover programming (Python), some algorithms, data representation, basic computer architecture, networks, and databases built step by step so the fundamentals actually stick before exams or university coursework get harder.

Lessons are hands-on: meaning we'll solve problems together and focus on the areas students usually get stuck on, like tracing algorithms or writing your first working programs.

We'll prepare thoroughly for final examinations so you can see the best results.

Yassine

4.64

(25)

Professeur agrégé de Sciences de l'ingénieur, j’aide élèves et étudiants à réussir examens et concours. J’interviens aux classes préparatoires (MPSI, MP, PSI...) et jusqu’à l’université (Licence ). Ma méthode : comprendre le cours, pratiquer avec rigueur, structurer le raisonnement et attaquer des exercices et problèmes bien choisis. Chaque séance inclut exercices ciblés, conseils méthodologiques, et suivi personnalisé. Vous recevez un enregistrement vidéo plus un PDF annoté après chaque cours. Cours en ligne via Google Meet, 7 jours sur 7, avec flexibilité horaire. Je reste joignable entre les séances pour répondre aux questions. Contactez-moi pour un premier échange.

طارق

4.64

(25)

Eleven years of experience, including both teaching and practical experience in the industry, along with a Bachelor's degree in Mechanical Engineering with a very good grade, have given me a very deep and accurate understanding of mechanical engineering concepts, in addition to extensive experience in the academic field due to my passing a very large number of exams and lessons, as well as teaching the material to my colleagues at the university and teaching it to secondary and university students.

I can confidently convey the concepts and principles of mechanical engineering to you in a way that suits your abilities, and I can address your problems in the following engineering subjects so that you will be able to pass any exam with distinction and excellence:
1- Principles of Mechanics
2- Calculus 1 + 2 + 3
3- Physics 1 + 2
4- Static
5- Dynamics
6- Fluid Mechanics
7- Heat transfer
8- Strength of material
9- Thermodynamics
10 - Mechanical Vibrations

You can contact me for more details before making your decision. You're most welcome.

Derek

4.64

(25)

Patient, practical tuition in Maths, Physics and Engineering Science from a mechanical engineer and further-education lecturer. I support Scottish National, Higher and Advanced Higher courses, GCSE learners throughout England, college and university students, apprentices and adult learners. Lessons are tailored to your level and goals, with calculations explained step by step, regular checks for understanding, revision planning, exam technique and real-world engineering examples. Topics can include algebra, trigonometry, calculus, statistics, mechanics, thermodynamics, fluid mechanics, electrical circuits and applied engineering calculations. I hold a Bachelor’s Degree in Mechanical Engineering, have over 25 years of engineering experience, five years of teaching experience, and a current PVG disclosure. Tuition is available online and in person in Glasgow, Monday to Saturday.

Test

4.64

(25)

You will learn how to develop websites with and without AI, as well as skills related to the software development sector such as programming, databases, different development methodologies, and writing technical specifications.

Mayank

4.64

(25)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

4.64

(25)

Learn PowerShell through practical, one-on-one training focused on real-world Windows administration.

This course is designed for IT professionals, system administrators, IT support technicians, and career changers who want to develop practical PowerShell skills for managing Windows Server, Active Directory, and Microsoft Exchange environments.

Topics Covered
PowerShell fundamentals and command structure

Working with PowerShell commands, cmdlets, parameters, and objects

Variables, operators, conditions, and loops

Working with files, folders, and Windows processes

Managing Windows Server with PowerShell

Creating and managing Active Directory users, groups, and computers

Active Directory administration and automation

Bulk user and account management

Searching and filtering Active Directory objects

PowerShell for Microsoft Exchange Online

PowerShell for on-premises Exchange Server

Managing Microsoft 365 and Exchange objects with PowerShell

Writing reusable PowerShell scripts

Error handling and troubleshooting

Automating repetitive administrative tasks

Practical scripting exercises based on real IT administration scenarios

Who Is This Training For?
This training is suitable for:

IT Support and Help Desk professionals

Desktop Support technicians

Windows Administrators

System Administrators

Microsoft 365 Administrators

Network/IT professionals

Students preparing for an IT career

Career changers entering the IT field

Anyone who wants to automate Windows administration tasks

No advanced programming background is required. We can start with the fundamentals and progress toward practical administration and automation.

Lessons are one-on-one and customized to your current knowledge and career goals, with an emphasis on hands-on exercises rather than theory alone.

If your goal is to learn PowerShell for Windows Server, Active Directory, Microsoft 365, or Exchange administration, this training can be tailored specifically to your needs.