Translated by GoogleSee original

Electrical Engineering: As a Doctor and Associate Professor in Electrical Engineering, I offer quality teaching in electrical engineering.

From 22 £ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. With in-depth expertise in electrical systems, I am able to teach all aspects of electrical engineering, including:
- Electricity and magnetism: Laws of electricity (Ohm, Kirchhoff), electrostatics, magnetic fields.
- Electrical circuits: Analysis of direct current (DC) and alternating current (AC) circuits.
- Electrical machines: Transformers, direct current motors, synchronous machines and asynchronous machines.
- Scalar command.
-Vector control.
- Three-phase systems: Analysis of balanced and unbalanced three-phase systems.
- Control electronics: Regulators, amplifiers, and modulation techniques.
- Power quality: Harmonics, power factors and compensation.
- Protection of electrical systems: Relays, circuit breakers and protection systems.
- Analysis of complex electrical networks: Modeling and simulation.
- On-board electronics: Applications in transport and aeronautics.
- Renewable energies: Photovoltaic, wind, hydraulic and grid integration.

Location

Online from France

About Me

I am a tenured professor and hold a doctorate in electrical engineering, and I have been teaching since 2014. Throughout my career, I have taught at various levels and in diverse programs within higher education institutions, including BTS (Advanced Vocational Training Certificate), CPGE (Preparatory Classes for the Grandes Écoles), faculties of science and technology, as well as in specialized training centers. This varied experience has allowed me to adapt to different teaching environments and contribute to the academic and professional development of students.

Education

Doctor of Electrical Engineering
Associate Professor of Engineering
Master's degree in Electrical Engineering
Bachelor's degree in electrical engineering
DEUST in Electrical Engineering
Baccalaureate in Physical Sciences

Experience / Qualifications

2024: Doctor of Electrical Engineering from the Faculty of Science and Technology
20214-2023: Associate Professor of Engineering in BTS classes

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

45 minutes

60 minutes

90 minutes

120 minutes

The class is taught in

English

French

Skills

Electrical engineering

Electrical circuits

Electromagnetism

Reviews

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Electronics, Electrotechnics, Automation and Industrial Computing

22 £ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Automatic: Associate professor in electrical engineering and doctor in electrical engineering, I offer quality teaching in automatic

22 £ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School on the control of dynamic systems, including:
- Systems theory: Linear and nonlinear systems, modeling.
- Open loop and closed loop systems.
- Regulation and control: Proportional, integral, derivative (PID).
- Frequency and time analysis: Frequency response, Bode diagrams, impulse response.
- Stability of systems: Routh-Hurwitz, Nyquist, and Bode criteria.
- Digital control systems: Discretization, digital regulators, Z transformation.
- Advanced regulation techniques: Adaptive, predictive, and robust control.
- Dynamic systems and simulations: Modeling by differential equations, simulation software
(MATLAB/Simulink).
- Identification of systems: Parametric and non-parametric methods.
- Nonlinear systems: Stability analysis, linearization, nonlinear regulators.

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Anh

4.85

(13)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Adam

4.85

(13)

..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This pedagogical approach is effective since it has often led me to interesting results with my students.

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Venkateswarlureddy

4.85

(13)

I am an Analog IC Design Engineer with strong academic and practical experience in integrated circuit design. During my master’s, I published two conference papers in the field of analog and power management circuits. Currently, I am working as an Analog IC Design Engineer, focusing on developing circuits such as operational amplifiers, current mirrors, bandgap references, and LDOs. My teaching approach blends solid theoretical foundations with real-world design practices, making complex concepts intuitive and industry-relevant. Whether you are a beginner or an advanced learner, I can guide you from fundamentals to hands-on design methodologies.

Sahbi

4.85

(13)

Learn electronics in a simple and practical way, adapted to your school level and needs. These courses are designed for all ages, from primary school to high school, and are available in French and Arabic.

You will learn :

The basics of electronics and electrical circuits
The operation of electronic components (resistors, LEDs, capacitors, etc.)
Simple setups and practical projects
Applying the concepts to the school curriculum

Each lesson is personalized according to the student's age and level, with interactive exercises and clear explanations to facilitate understanding.

Individual or small group online courses
Educational materials in PDF format and explanatory videos
Practical exercises adapted to the school curriculum
Personalized tracking to measure progress

Muhammad

4.85

(13)

As a teaching assistant in the College of Engineering (specializing in Mechatronics Systems Engineering), I provide specialized academic support to engineering students to help them understand complex material, pass exams with distinction, and complete academic projects professionally.
I offer explanations and assistance in the following courses:
• Fluid Mechanics & Hydraulic/Pneumatic Control.
• Rigid Body Dynamics.
• Sensors and Data Acquisition Systems.
• Digital control machines and computer-aided design/manufacturing (CAD/CAM & CNC).
• Electric Machines & Drives.
• Renewable Energies.
In addition to theoretical explanations and worksheet solutions, I offer practical guidance in using engineering software (such as MATLAB and ANSYS) and assistance with graduation projects and course projects (CAD modeling and CFD simulations). My goal is to simplify engineering concepts and connect them to practical applications.

Amir

4.85

(13)

Basics of electricity
electric current
electrical potential
The difference between power and electrical energy
Electrical resistance, its types, and methods of connection
How to calculate total resistance
How to calculate the total current in an electrical circuit and the current flowing through a branch
How to calculate the potential difference between two points

Ali

4.85

(13)

HI, I’m Ali, an expert tutor in Electronics and Electrical Engineering with strong foundations in circuit design, simulation, and practical hardware systems.

Online lessons

If Electricity and Electronics make sense in class, but everything starts falling apart when the question becomes a real circuit, a phasor problem, an RLC response, or a simulation task, you are not alone.

Most students do not struggle because they are not capable.
They struggle because nobody has shown them how to think through the physical system properly, choose the right troubleshooting method, and present the solution with confidence.

That is exactly where I help.

WHAT MAKES MY TEACHING DIFFERENT
I do not teach Electrical Engineering, Electronics, and Circuit Theory as isolated topics.

I teach them as one connected system.

With my Electronics Engineering background and extensive hands-on experience in hardware systems design, my approach is always:

Model & Simulate

Solve & Optimise

Verify (Hardware/Software)

Improve & Troubleshoot

This means you do not just memorise formulas for one test. You learn how to approach unfamiliar engineering problems, schematic designs, and hardware constraints with structure, logic, and control.

WHO THIS PROFILE IS FOR
This profile is built for you if:

you understand parts of the topic, but struggle to connect theory to practical hardware implementation under pressure

you can follow solved textbook examples, but get stuck when starting circuit designs or simulations alone

your circuit setup, phasors, Laplace work, or PCB layouts break down mid-solution

you need technical help that is clear, structured, and highly relevant to your engineering modules or lab projects

you want a practical engineering method, not vague motivation

you want to become independent, mastering industry-standard tools instead of relying on memorised steps

WHAT YOU WILL ACTUALLY IMPROVE
I focus on the parts of Electronics and Electrical Engineering that usually decide whether a student feels in control, or completely stuck.

That includes improving how you handle:

Electrical Circuits, Mesh/Nodal Circuit Analysis, AC and DC Circuits

Phasors, complex impedance, and RLC Circuits

Circuit Simulations (Proteus, LTspice, Multisim, KiCad, Altium Designer)

Hardware Design, PCB Layout, and routing constraints

Analogue and Digital Electronics, Electronic Devices, and VLSI/SoC concepts

Signals & Systems, Signal Processing, and Control Systems block diagrams

Digital Logic Design (DLD), Boolean Algebra, K-Maps, and State Machines (FSM)

Embedded Systems, microcontrollers, and integrating Machine Learning into hardware

Applied Mathematics for Engineers, Calculus, Differential Equations, Fourier Analysis, and Laplace Transforms

WHAT I HELP STUDENTS DO
Most students come to me because they want more than a basic theoretical explanation.

They want to be able to:

read the engineering question or schematic properly

identify what the circuit or system is actually doing

choose the correct analysis method faster

set up the software simulations cleanly and debug errors

avoid common hardware and design mistakes

finish with a working layout or solution they can justify

SUBJECT AREAS I SUPPORT
My main subject support is built around:

Electronics Engineering

Circuit Design & Simulation

Electrical Engineering Foundations

Digital Logic Design

Within that, I regularly position lessons around high-value areas such as:

Circuit Analysis (AC/DC) & Phasors

PCB Layout & Hardware Prototyping

Embedded Systems & Microcontrollers

Control Systems & Signal Processing

Digital Logic Design & Digital Systems

Solid State Devices & VLSI Concepts

For students on broader technical pathways (like Mechatronics, Robotics, or Automation), I can also support connected areas like programming, sensor integration, and machine learning applications when they are part of your course demands.

HOW MY ENGINEERING BACKGROUND HELPS
My Electronics Engineering background, combined with practical industry exposure in testing labs, grid stations, and professional freelance PCB design, is useful here for one reason:

it pushes disciplined, real-world technical thinking.

Instead of rushing to formulas, I train students to understand the circuit model and software verification first. That changes everything.

It helps you see:

what the components and systems are actually doing

why one simulation tool or design choice fits better than another

where errors and noise usually enter the solution

how to verify the hardware design before moving to fabrication

That is the difference between copying worked examples and actually understanding engineering.

HOW THE SUPPORT FEELS
Students usually work well with me because the sessions are:

structured, calm, and technical

practical and focused on real design improvement

You do not get vague advice. You get direction, software walkthroughs, and a debugging method you can keep using after the lesson ends. This is especially useful for students preparing for exams, difficult university modules, lab tasks, or Final Year Projects (FYPs).

WHY THIS APPROACH WORKS
A lot of students spend hours watching tutorials, but still cannot design a circuit or solve questions independently. Passive exposure is not the same as technical control.

My goal is to make you someone who can start the question or design with confidence, move through the layout or working without panicking, and build stronger engineering performance over time.

BEFORE WE START, FIT CHECK
To make the first lesson useful from the start, send:

Level / Degree Course

Exam board or university module guidelines

Exam date, project deadline, or timeline

3 priority topics or software tools you want to master

The exact point where you get stuck

1 to 3 questions, project briefs, or screenshots

Abdelmalek

4.85

(13)

This hands-on training pathway is designed to help students kickstart any project, specifically tailored for OT labs and industrial applications. Starting from absolute scratch, students will build a strong foundation in Python programming through practical, industry-relevant concepts.

Curriculum Outline: |
01 - Python Environment Setup & Basics |
02 - Python Variables, Numbers, Bytes & Hex |
03 - Control Flow Logic Functions |
04 - Data Structures (Lists, Tuples, Dictionaries & Sets) |
05 - String Formatting, Comprehensions & Exception Handling |
06 - File IO, Pathlib & Context Managers |
07 - Object-Oriented Programming (Classes & OOP) |
08 - Standard Library, Modules & Networking Basics |

Assessment & Evaluation:
Students will take a mini-test after the completion of each module. Additionally, an Audit & Performance Evaluation report will be sent following the tests.
Duration:
5 days to 15 days (depending on the pace of the cohort)

Henoc

4.85

(13)

Prof d'Électricité - Cours en Direct depuis une Vraie Salle de Classe

MARRE DES COURS DEVANT UNE FEUILLE BLANCHE ?

Je donne mes cours EN DIRECT depuis une salle de classe avec tableau et craies.
Comme à l'école, mais en Google Meet chez vous.

POUR QUI ?
COLLÈGE / LYCÉE : Circuits, lois, sécurité, lecture de schémas
BAC PRO : Schéma de puissance, schéma de commande, câblage, installation
BTS : Schéma industriel, démarrage des moteurs, relais et contacteurs

MA MÉTHODE :
On travaille sur VOS exercices. Je vous explique au tableau pas à pas.
Explications claires et concrètes avec des exemples de chantier.
Vous voyez tout ce que j'écris et vous repartez avec des photos du cours.

COMMENT ÇA SE PASSE ?
Cours 100% en visio via Google Meet.
Qualité pro : Son + Image + Tableau visible.
Horaires : Le soir et week-end, heure de France.

Niveaux : Débutant à Avancé. 1er cours pour tester.

Dhanush

4.85

(13)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

Uma

4.85

(13)

Electronic, communication systems,electromagnetic fields , embedded system, digital electronic, digital signal processing, digital image processing,optical communication, signals and systems,applied electronics, microwave engineering,TLN,radio engineering

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.