Translated by GoogleSee original

Analog and digital electronics: As a Doctor and Associate Professor in Electrical Engineering, I offer quality teaching.

From 21 £ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Location

Online from France

About Me

I am a tenured professor and hold a doctorate in electrical engineering, and I have been teaching since 2014. Throughout my career, I have taught at various levels and in diverse programs within higher education institutions, including BTS (Advanced Vocational Training Certificate), CPGE (Preparatory Classes for the Grandes Écoles), faculties of science and technology, as well as in specialized training centers. This varied experience has allowed me to adapt to different teaching environments and contribute to the academic and professional development of students.

Education

Doctor of Electrical Engineering
Associate Professor of Engineering
Master's degree in Electrical Engineering
Bachelor's degree in electrical engineering
DEUST in Electrical Engineering
Baccalaureate in Physical Sciences

Experience / Qualifications

2024: Doctor of Electrical Engineering from the Faculty of Science and Technology
20214-2023: Associate Professor of Engineering in BTS classes

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

45 minutes

60 minutes

90 minutes

120 minutes

The class is taught in

English

French

Skills

Electronic circuits

Electrical engineering

Electrical circuits

Reviews

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Electronics, Electrotechnics, Automation and Industrial Computing

21 £ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Automatic: Associate professor in electrical engineering and doctor in electrical engineering, I offer quality teaching in automatic

21 £ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School on the control of dynamic systems, including:
- Systems theory: Linear and nonlinear systems, modeling.
- Open loop and closed loop systems.
- Regulation and control: Proportional, integral, derivative (PID).
- Frequency and time analysis: Frequency response, Bode diagrams, impulse response.
- Stability of systems: Routh-Hurwitz, Nyquist, and Bode criteria.
- Digital control systems: Discretization, digital regulators, Z transformation.
- Advanced regulation techniques: Adaptive, predictive, and robust control.
- Dynamic systems and simulations: Modeling by differential equations, simulation software
(MATLAB/Simulink).
- Identification of systems: Parametric and non-parametric methods.
- Nonlinear systems: Stability analysis, linearization, nonlinear regulators.

Youssef

4.85

(13)

Engineer and senior professor of engineering sciences provides support courses in analog and digital electronics at all levels, engineering schools. having a scientific and technical knowledge, five years of experience in the field of teaching, teaching and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they have difficulties. for more info please contact me

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Adam

4.85

(13)

doctoral student in engineering sciences provides support courses in analog and digital electronics at any DEUG level and engineering schools. having scientific and technical knowledge, three years of experience in the field of teaching, pedagogy and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they are having difficulty. for more info please contact me

Anh

4.85

(13)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Ahmed

4.85

(13)

Learn from the ground up, starting with the fundamentals of electronics and various electronic components.
Understand the necessary electrical connections to design and program smart home and Internet of Things (IoT) circuits.
Explore what Arduino is and the programming language used to control it.
Discover how to create programs to control home devices using a mobile phone.

Training includes working with real Arduino circuits as well as using simulation software.
I offer practical and simplified training that starts from the fundamentals of electronics and progresses to designing and programming smart home and Internet of Things (IoT) systems. The course includes clear theoretical explanations and hands-on applications using real circuits and digital simulation software.

Course Content

Electronics Fundamentals

Introduction to essential electronic components: resistors, capacitors, diodes, transistors, and sensors

Understanding proper electrical connections

Reading electronic circuits and using the breadboard

What is Arduino and How Do We Program It?

Introduction to Arduino boards

Explanation of the C/C++ programming language used for Arduino

How to upload code and test projects step by step

Designing and Programming Smart Home Circuits

Connecting sensors and smart switches

Controlling lighting and household devices

Designing a system to control the home using a mobile phone

Introduction to IoT and integrating it with home automation

Mobile Phone Home Control

Creating simple control interfaces

Connecting using Wi-Fi or Bluetooth

Turning devices on and off and monitoring sensors remotely

Practical Training

Working with real Arduino circuits

Using simulation software such as Tinkercad and Proteus

Building ready-to-use practical projects

Who Is This Course For?

Beginners in electronics

Students interested in learning Arduino programming

Anyone who wants to build a smart home project

Anyone looking to understand how electronics work in a simple and practical way

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Thelma

4.85

(13)

Struggling with Physics? Let's work towards better grades together!
Hi, I'm Thelma, and I offer supportive online mathematics lessons for students studying GCSE, IGCSE, AS and A-Level Physics.
Whether you're struggling with the basics, finding algebra confusing or preparing for an important examination, my lessons are designed around your learning needs and goals.

• We will focus on;

📘 GCSE & IGCSE Physics
We can work on:
•
•
•
•
•
•

📗 AS & A-Level Physics
Topics include:
•
•
•
•
•
•

🎯 Exam Preparation
We will practice exam-style questions, review challenging topics, identify areas for improvement and work through solutions step by step. Where appropriate, we will use past papers from your examination board, including Pearson Edexcel, AQA and OCR.

💻 What to expect in my lessons
• Clear, step-by-step explanations
• Interactive online teaching and worked examples
• Practice questions suited to your level
• Lessons tailored to your goals
• Support with revision and homework questions

Whether you need help understanding a topic or want structured exam preparation, we can focus on the areas where you need the most support.
Ready to improve your understanding of Physics? Book a lesson, tell me your exam board and the topics you find difficult, and let's get started!

Dhanush

4.85

(13)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

Amir

4.85

(13)

Physics is a fascinating subject that helps us understand how the world around us works. As an experienced scientist with a passion for teaching and sharing science, I enjoy helping students develop a deeper and more intuitive understanding of physics. My lessons cover topics including classical mechanics, optics, electromagnetism, quantum mechanics, and quantum optics, and can be tailored to your level and learning goals. Whether you are preparing for an exam, studying at university, or simply curious about physics, I focus on clear explanations, problem-solving, and making even challenging concepts easier to understand.

Uma

4.85

(13)

Electronic, communication systems,electromagnetic fields , embedded system, digital electronic, digital signal processing, digital image processing,optical communication, signals and systems,applied electronics, microwave engineering,TLN,radio engineering

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

Hend

4.85

(13)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Niranjan

4.85

(13)

Hi! I am an electronics engineer and Master's student in Electronics Engineering at the University of Pavia, Italy, with approximately 7 years of professional experience, including experience at Analog Devices and Intel.

I offer online tutoring in Mathematics, Physics, and Electronics, with a focus on building strong fundamentals, understanding concepts clearly, and solving problems step by step.

**What I can teach:**
- Mathematics and Physics for high-school students, including Classes 11 and 12
- Basic electrical and electronic engineering
- Analog and digital electronics
- Fundamentals of ADCs, signal processing, and related engineering topics
- Exam preparation, numerical problem-solving, and concept revision

My teaching approach focuses on understanding the underlying principles rather than memorising formulas. I use practical examples and real-world engineering applications to make difficult topics easier to understand.

I also create educational videos on electronics and engineering concepts through my YouTube channel, Semi Tech.
https://youtu.be/bu0mKGemLBI?si=ajxcMoMiFB2wuMX4

Lessons are available online in English and can be tailored to each student's level, goals, and learning pace. Beginners are welcome!

Abderrahim

4.85

(13)

As an engineering student at ESIEA with a degree in electronics, I help you understand math step by step: algebra, analysis, trigonometry, and equations. I explain things simply with diagrams and concrete examples, starting from your level. We work through progressive exercises, which we then solve together.