Autodesk Inventor, design, assembly and part model

From 25 £ /h

CAD software from beginner to professional.
This software used to model any 3D body, or to assemble and simulate any 3D machine. Also can be used to generate a technical drawing of any machine with parts.
It is a vital tool for engineer and any designer.

Extra information

You must have the software using laptop

Location

Online from Lebanon

About Me

Mechanical Engineer.
Passionate about innovation and design.
Engineering is my life.
I aim to help students discover their skills and potentials. I believe everyone has an inner strength in the area he likes, but some may need a push or orientation to guide them through a straight and clear methodology so they can find their potentials hidden within and reveal their skills.
I have been teaching and helping students for two years. I helped students achieve good grades and pass courses they did not understand.
The way I use to work is credibility and dedication. I am committed to deliver good teaching service to students, sound and clear.
I work to help them achieve good grades. This is only done when students get full command of course.

Education

Master of Mechanical Engineering - American University of Beirut
Multidisciplinary engineering courses ranging from general engineering courses (Calculus and physics) to specific Mechanical Engineering courses (Thermodynamic and fluid mechanic and static and mechanic of materials and heat transfer and hydraulic)

Experience / Qualifications

3 years private engineering tutor
Taught different materials of engineering and high school (Math and physics) and engineering subjects

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

French

Arabic

Skills

Mechanical engineering

Cad software

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

fluid mechanic, thermodynamic, mechanic of material, static, machine design, HVAC, Hydraulic, Heat Transfer

25 £ /h

Classes that cover different engineering aspects: Structural and Energy.
Can provide support and help in these subjects involving different modules. These are basic courses for engineering and especially Mechanical Engineering.
Can provide different resources and problems and explain the solving method and use of the software.

Solidworks, part modelling, simulation, machine design

25 £ /h

A powerful CAD tool used to model 3D body and make machine design and part modeling. Used to simulate a machine, design a machine, make a technical drawing.
Important tools for the job market, used especially by a mechanical engineer but is vital for all engineering.
Wide software that covers also routing (electrical module), piping, and simulation

Anh

4.78

(9)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Matías

4.78

(9)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Haider

4.78

(9)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ CAD (including CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ FEM (including Ansys, CREO - SolidEdge - Inventor - NX - SolidWorks)
✔ CFD (including Ansys CFX & Fluent, OpenFoam, CREO)
✔ Energy theory
✔ Thermal theory
✔ Chemistry
✔ BQ NTG
✔ HQ technology
✔ Computer science
✔ Structural theory (TWL 1 to 3)
✔ Elastostatics
✔ Dynamics
✔ Materials science
✔ Steel construction

+ other subjects on request

When contacting us, please state your class/course of study/training and subject!

I am looking forward to hearing from you.

Reza

4.78

(9)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Adam

4.78

(9)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.78

(9)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Paloma

4.78

(9)

Architect and Onthological Coach | Mentorships for entrepreneurs that are starting

I plan the classes and exercises depending on the goal of the student. Aswell I am freelancer worldwide, delivering technical drafting and working in projects together

The programs that I teach are:
AutoCAD 2D
Sketchup
Lumion 11
Photoshop
Illustrator

Dependiendo de la necesidad del alumno podemos aprender puntualmente alguna herramienta de diseño en particular de las siguentes:
- AutoCAD 2d
- Sketchup
- Lumion 11
- Photoshop
- Illustrator

Brindo clases, mentorias, consultorias de diseño trabajando como freelancer en todo el mundo. Realizo documentación tecnica, modelados 3D y proyectos en conjunto para diseñar

شريف

4.78

(9)

Specialized in teaching curricula and courses for male and female students of engineering faculties at all university levels. Bachelor’s, Master’s, Ph.D., Departments of Mechanics, Electricity, Mechatronics, and Aviation.
We also teach the same disciplines curricula to students of colleges and engineering and technical institutes.

Experience in teaching the curricula of all Gulf and Egyptian universities and universities in Britain and America for scholarship students.

Some of the curricula we teach are
Mathematics Electrical Circuits Physics Design Fluid Mechanics, Thermodynamics, Power Stations, Electrical Machines, MATLAB, SolidWorks, Algebra, Stereoscopic Engineering, Analytical Engineering, Integration of Control Differential and Theory of Machines, Hydraulic Circuits, Motors, Refrigeration and Air Conditioning, Aerodynamics, Mechanical Vibrations, Stress Analysis, Nuclear Heat Transfer Water desalination transmission and distribution networks
fluid mechanics thermodynamics physics, thermodynamics 1 and 2, thermo b, calculus, turbo diesel engines, calculus, integration, control and design of Fluid Turbo Machine and electrical circuits MATLAB thermodynamics fluid .aerodynamics heat transfer PLC mathematics matlab control power plant air conditioning system and refrigeration ice circuit ,thermo b vibration theory of machine robots Aerospace engineering aeronautics
CFD fluent ansis gambit solidworks electric machines stress analysis design
thermodynamics b fluid advanced mathematics aerodynamics heat and mass transfer PLC mathematics matlab control power plant air conditioning system numerical methods desalination hydraulic circuit and refrigeration nuclear energy calculus Saudi Aramco tests turbo machine Quadcopter Drones
FE course projects and more for mechanical engineering, electrical engineering civil
engineering industrial engineering mechatronics engineering

Some of the universities we teach are
Princess Nourah bint Abdulrahman University - PNU - Saudi ArabiaKING ABDULAZIZ UNIVERSITY - Saudi ArabiaDammam University (Imam Abdul Rahman bin Faisal) - (imam abdulrahman bin faisal university)University of Dammam - Saudi ArabiaKing Faisal University - King Faisal University - KuwaitUniversity of Kuwait - kuwait university - KuwaitKuwait College of Science & Technology - KuwaitEmirates College of Technology - Emirates College of Technology - United Arab EmiratesYanbu University College - Saudi ArabiaNYIT - New York Institute of Technology (NYIT) - United Arab EmiratesKing Fahd University of Petroleum and Minerals (KFUPM) - Saudi ArabiaThe Petroleum Institute (PI) - United Arab EmiratesThe American University of Kuwait - American University of Kuwait - KuwaitAmerican University of the Middle East - American University of the Middle East - KuwaitCanadian University Dubai (CUD) - United Arab EmiratesSultan Qaboos University - Sultan Qaboos University - Sultanate of OmanHigher College of Technology - Sultanate of OmanGerman University of Technology in Oman - GERMAN UNIVARCITY OF TECHNOLOGY IN OMAN - Sultanate of OmanUniversity of Nizwa - University of Nizwa - Sultanate of Oman
Kuwait University Hafr Al-Batin University Princess Nora Bint Abdul Rahman University King Abdulaziz University Jubail Industrial College Jubail University College Dammam University King Faisal University Kuwait College of Science and Technology Emirates College of Technology Yanbu University College Saudi Arabia New York Institute of Technology Petroleum Institute Saudi Aramco Exams King Fahd University of Petroleum and Minerals The British University, The American University in Kuwait, The American University of the Middle East, Kuwait
Canadian University, Dubai, Sultan Qaboos University, Sultanate of Oman, Higher College of Technology, Sultanate of Oman
The Russian University The German University The German University The University of Nizwa Qatar University Northwestern University in Qatar - Northwestern University in Qatar Texas A&M University at Qatar - QatarGeorgetown University in Qatar - QatarVirginia Commonwealth University in Qatar - Virginia Commonwealth University - Qatar - College of the North Atlantic Qatar - Qatar

Ammar

4.78

(9)

Engineering and design become much easier when analysis, geometry, technical representation, digital modelling, spatial reasoning, and visual communication are connected within one coherent problem-solving process.

I am a PhD-qualified engineer, university professor, researcher, technical trainer, designer, and multidisciplinary consultant with more than 30 years of experience across engineering, teaching, project work, CAD, technical drawing, 3D modelling, GIS, visualization, information systems, and professional problem solving.

This class provides a personalized pathway for school and university students, engineering and design learners, architects and technicians, researchers, professionals, career changers, and adult learners. Depending on your goals, we can focus deeply on one specialized area or connect several areas within a complete technical workflow.

PHYSICS & APPLIED ENGINEERING SCIENCE
• Mechanics: motion, forces, Newton’s laws, work, energy, momentum, and rotational motion
• Statics, dynamics, equilibrium, torque, and engineering applications
• Fluids, pressure, buoyancy, density, and basic fluid mechanics
• Heat, temperature, thermodynamics, and energy transfer
• Waves, oscillations, sound, optics, electricity, and magnetism according to the learner’s level
• Mathematical modelling of physical systems
• Units, dimensions, vectors, graphs, and interpretation of experimental or engineering data
• Connecting physical principles to engineering design, calculations, and real-world technical problems

CHEMISTRY & ENGINEERING MATERIALS
• Atomic structure, chemical bonding, molecular structure, and periodic trends
• Stoichiometry, chemical reactions, solutions, concentrations, gases, and equilibrium
• Acids, bases, oxidation-reduction, and introductory thermochemistry
• Properties and behaviour of engineering materials
• Metals, polymers, ceramics, composites, and material-selection principles when relevant
• Connecting chemical principles to materials, manufacturing, environmental, and engineering applications

ENGINEERING DESIGN & PROBLEM SOLVING
• Understanding and structuring engineering problems
• Translating requirements into technical objectives
• Identifying constraints, assumptions, variables, and criteria
• Engineering calculations and quantitative reasoning
• Applied mechanics and engineering fundamentals when relevant
• Dimensional reasoning and unit consistency
• Design alternatives and trade-off analysis
• Verification and reasonableness checking
• Engineering decision making
• Design methodology and iterative improvement
• Interpreting technical specifications
• Connecting analysis to drawings, models, and deliverables
• Engineering-management and multidisciplinary project contexts

AUTOCAD & TECHNICAL DRAFTING
• AutoCAD interface and efficient workflows
• Coordinate systems and precise geometric construction
• 2D drafting fundamentals
• Layers, properties, object organization, and standards
• Blocks and reusable drawing content
• Dimensions, annotations, text, and hatching
• Model space and paper space
• Layouts, viewports, scales, and plotting
• Technical drawing principles
• Reading and interpreting engineering drawings
• Plans, sections, elevations, and details
• Drawing organization and documentation quality
• Advanced drafting workflows
• AutoCAD 3D concepts when relevant
• Improving speed, accuracy, and drawing consistency

BIM & REVIT WORKFLOWS
• BIM concepts and model-based thinking
• Revit project organization
• Levels and grids
• Walls, floors, roofs, and building elements
• Doors, windows, components, and families
• Views, sections, elevations, and schedules
• Annotation and documentation workflows
• Sheets and presentation standards
• View templates and graphical consistency
• Family-library organization
• BIM coordination principles
• Connecting models to professional documentation
• Developing structured Revit templates and repeatable workflows

3D MODELLING & PARAMETRIC DESIGN
• 3D geometric thinking
• Curves, surfaces, solids, and meshes
• Constructive and feature-based modelling concepts
• Precision modelling
• Product and engineering geometry
• Architectural and spatial modelling
• Rhino 3D workflows
• Grasshopper and visual parametric thinking
• Parameters, relationships, dependencies, and constraints
• Algorithmic generation of geometry
• Reusable and adaptive design logic
• Design iterations and controlled variation
• SolidWorks and Inventor workflows when relevant
• 3D Studio Max and visualization contexts when relevant
• Connecting models to drawings, analysis, fabrication, or presentation

CAD/CAM & MANUFACTURING WORKFLOWS
• From CAD geometry to manufacturable components
• Design-for-manufacturing principles
• Introduction to CAM concepts and machining strategies
• CNC fundamentals, coordinate systems, tools, operations, and toolpaths when relevant
• SolidWorks CAD/CAM workflows
• Verification, simulation, and interpretation of manufacturing outputs

GIS, MAPPING & SPATIAL ANALYSIS
• Foundations of Geographic Information Systems
• Spatial data models
• Vector and raster concepts
• Coordinate systems and projections
• Georeferencing
• Spatial data collection and organization
• Attribute data and database relationships
• Geodatabases
• Selection and spatial queries
• Buffering, overlay, proximity, and spatial analysis
• Thematic mapping
• Cartographic principles
• Spatial patterns and decision support
• ArcGIS Desktop and ArcGIS Pro workflows when relevant
• Remote-sensing and imagery concepts when relevant
• Integrating maps, analysis, and professional reporting

GRAPHIC DESIGN & VISUAL COMMUNICATION
• Principles of visual communication
• Composition and layout
• Visual hierarchy
• Typography
• Colour and contrast
• Image preparation and editing
• Vector graphics and illustration
• Technical diagrams and infographics
• Maps and spatial presentation
• Engineering and architectural presentation
• Portfolio and project-board development
• Presentation graphics
• Adobe Photoshop workflows
• Adobe Illustrator workflows
• Adobe InDesign workflows
• Connecting technical accuracy with visual clarity

Depending on your objectives, practical work may involve AutoCAD, Revit, BIM workflows, Rhino, Grasshopper, SolidWorks, Inventor, 3ds Max, ArcGIS Desktop, ArcGIS Pro, QGIS, Adobe Photoshop, Illustrator, InDesign, SketchUp, Figma, Canva or other relevant technical and design tools.

My teaching approach follows a structured workflow:
define the problem → understand the requirements → analyze the constraints → develop the geometry or data structure → create the drawing, model, or spatial analysis → verify accuracy → refine the solution → communicate it clearly

I do not simply demonstrate isolated commands. I help you understand why a workflow is appropriate, how information should be structured, how accuracy can be verified, how alternative solutions can be evaluated, and how the final technical idea should be communicated professionally.

We can work with your course syllabus, engineering problem, technical drawing, CAD file, Revit/BIM model, 3D model, parametric definition, GIS dataset, map, design project, portfolio, graphic layout, or professional workflow challenge.

Whether you are learning your first CAD commands, solving an engineering problem, developing a BIM workflow, building a 3D or parametric model, conducting spatial analysis, or improving technical visual communication, I will adapt the sessions to your level, objectives, and pace.

My goal is to help you become an independent technical problem solver who can analyze, design, model, verify, visualize, and communicate solutions with confidence.

Massimiliano

4.78

(9)

Struggling with your classes or upcoming exams?
I've been there too, and I can help with personalized one-to-one tutoring tailored to your needs. From one student to another, we'll focus on what you actually need to understand, improve, and succeed.

Arun

4.78

(9)

I provide practical, one-to-one training in Autodesk Inventor and Autodesk Vault, focused on helping students understand the software and apply it effectively to real engineering work.

The training can be adapted to your current level and objective. We can work through Autodesk Inventor concepts step by step, or take a completely hands-on approach where you create your own models while I guide you, identify issues, explain better methods and share practical modelling and engineering best practices.

For Autodesk Inventor, topics can include part modelling, assemblies, drawings, design intent, modelling strategies, constraints, parameters, design changes and general CAD best practices. If you already have experience with Inventor, we can focus on improving your modelling approach, solving specific problems or reviewing your existing work.

For Autodesk Vault, we can focus on understanding document and design data management, file organisation, versioning, revisions, check-in/check-out, working with CAD data and practical workflows for managing engineering files.

The lessons are not based on a fixed syllabus. I adapt each session to what you actually need to learn or solve. You can also bring your own model, exercise, project or specific problem and we can work through it together.

I have more than 14 years of experience working at the intersection of engineering, manufacturing, CAD, PDM and PLM, so the focus is not only on which button to click, but also on understanding why a particular approach is useful in an engineering environment.

The lessons are suitable for students, engineering professionals, designers and anyone who wants to improve their practical Autodesk Inventor or Vault skills.

Derek

4.78

(9)

Patient, practical tuition in Maths, Physics and Engineering Science from a mechanical engineer and further-education lecturer. I support Scottish National, Higher and Advanced Higher courses, GCSE learners throughout England, college and university students, apprentices and adult learners. Lessons are tailored to your level and goals, with calculations explained step by step, regular checks for understanding, revision planning, exam technique and real-world engineering examples. Topics can include algebra, trigonometry, calculus, statistics, mechanics, thermodynamics, fluid mechanics, electrical circuits and applied engineering calculations. I hold a Bachelor’s Degree in Mechanical Engineering, have over 25 years of engineering experience, five years of teaching experience, and a current PVG disclosure. Tuition is available online and in person in Glasgow, Monday to Saturday.

Aashish

4.78

(9)

Master Engineering Drawing, Technical Drawing and Engineering Graphics with a practical, step-by-step approach.

Are you a student who finds engineering drawing difficult to visualize? Do you want to understand orthographic projections, front/top/side views, sections, dimensions, scales, and 3D shapes instead of simply memorizing drawing procedures?

I provide friendly, patient and practical online coaching in Technical Drawing, Engineering Drawing, Engineering Graphics, CAD and Engineering Design for students from high school through university, as well as professionals who want to strengthen their technical drawing and design skills.

What You Will Learn

The classes are designed to develop both your drawing skills and your ability to visualize engineering objects in 2D and 3D.

Topics can include:

Engineering Drawing fundamentals and drawing conventions
Visualization of 2D and 3D geometric shapes
Orthographic projection
Front, Top, Side and Back views
First-angle and Third-angle projection
Isometric views and pictorial representation
Sectional views and sectional drawings
Hidden lines, centre lines and construction lines
Dimensions, annotations and engineering symbols
Scales and measurement
Geometrical constructions
Development of surfaces
Intersections of solids
Tolerances and basic fits
Engineering drawing standards and conventions
Reading and interpreting engineering drawings
Production-oriented technical documentation
Mechanical components and product drawings
Basic engineering design principles
From Hand Drawing to CAD and 3D Models

I also help students understand how traditional engineering drawing connects with modern Computer-Aided Design (CAD).

You can learn how a product or mechanical component can be:

Visualized → Sketched → Dimensioned → Created in CAD → Converted into a 3D Model → Prepared for Manufacturing / 3D Printing

Depending on your requirements, lessons can include AutoCAD, 2D drafting, 3D modelling and engineering design workflows.

The objective is not only to teach you which commands to use, but to help you understand why a drawing is created in a particular way and how engineers use drawings to communicate a design.

Practical, Student-Focused Teaching

My teaching approach is based on understanding through visualization and practice.

Instead of simply demonstrating a drawing, I explain:

How to visualize the object before drawing it
How to identify the different surfaces and views
How the front, top and side views are related
How to determine the required dimensions
How to construct the drawing step by step
How to avoid common drawing mistakes
How to interpret engineering drawings correctly
How the same concept is applied in CAD and real-world design

Lessons include worked examples, practical exercises and real engineering/product examples so that students can gradually develop confidence and independence.

Who Are These Classes For?

These lessons are suitable for:

High school students studying technical/engineering drawing
Diploma students
Mechanical Engineering students
Civil Engineering students
Architecture students
Industrial Engineering students
Product Design students
Manufacturing Engineering students
Other engineering students studying Engineering Graphics or Engineering Drawing
Students preparing for examinations
Beginners learning CAD and technical drawing
University students working on drawing or CAD projects
Professionals who want to refresh or improve their technical drawing skills

Beginners are welcome. No advanced prior knowledge is required.

Online & Interactive Lessons

All lessons are conducted online and interactively.

Depending on the topic, I can use:

Screen sharing
Live drawing demonstrations
CAD demonstrations
2D drafting
3D modelling
Step-by-step problem solving
Practical drawing exercises
Real-world engineering examples

You can bring your specific syllabus, textbook exercises, assignments, CAD projects or exam topics, and the lessons can be adapted to your requirements.

Learn to Think Like a Designer

Engineering drawing is more than producing a neat drawing on paper. It is a method of visualizing ideas, communicating designs and understanding how objects are constructed and manufactured.

My goal is to help you move from:

“I don't understand this shape.”

to

“I can visualize it, draw its views, add the required dimensions and understand how it would be represented in CAD and manufactured.”

Whether you are starting from zero, preparing for an examination, struggling with engineering graphics, learning CAD, or working on a design project, I will guide you step by step at your own pace.

Book a lesson and let's make Engineering Drawing and CAD easier, more visual and more practical.

Hakan

4.78

(9)

I offer clear and structured Calculus I and Calculus II lessons for university students, particularly those studying engineering, science, and other STEM subjects.

My aim is not only to help you solve problems, but also to understand the mathematical ideas behind the methods. I explain concepts step by step and connect calculus to practical applications in physics and engineering whenever useful.

Topics can include:

• Functions, limits, and continuity
• Derivatives and differentiation techniques
• Applications of derivatives and optimization
• Integrals and integration techniques
• Applications of definite integrals
• Sequences and series
• Parametric and polar functions
• Introduction to multivariable calculus
• Partial derivatives
• Engineering applications of calculus

Lessons can be adapted to your individual goals, whether you need help understanding a difficult topic, preparing for an exam, reviewing a course, or solving practice problems.

As a mechanical engineer with university-level teaching and laboratory experience, I regularly work with mathematics in subjects such as mechanics, thermodynamics, fluid mechanics, heat transfer, and computational engineering. This allows me to explain not only how a mathematical method works, but also why it is useful.

Lessons are interactive and tailored to your current level. Students are encouraged to ask questions throughout the lesson.

Hend

4.78

(9)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.