Physics and Chemistry: Mechanics, Electricity, Optics, Electromagnetism, Quantum Mechanics, Nuclear Mechanics, Solution Chemistry, Organic Chemistry - Rabat - Private lessons

Translated by GoogleSee original

Physics and Chemistry: Mechanics, Electricity, Optics, Electromagnetism, Quantum Mechanics, Nuclear Mechanics, Solution Chemistry, Organic Chemistry

From 16.29 £ /h

Praise be to God, high competence with academic qualifications and acquired experience.
Good explanation with fluent language and providing a pleasant atmosphere
For review and support to achieve the best possible result, God willing.
With a pre-review of the lessons to ensure the success of the session and to gain the greatest possible benefit, adherence to the teacher's instructions, and provision of school supplies.

Extra information

Pre-review of your lessons

Location

|

Use Ctrl + wheel to zoom!

At student's location :

Around Rabat, Morocco

At teacher's location :

رميلة با حمان, حي المحيط، الرباط، المغرب

Online from Morocco

About Me

I practice teaching not only to earn money, but also to share my knowledge and gains with those interested, to make them love physics, and to explain the meanings as they should be understood in order to achieve good results and obtain good grades in exams.

Education

I started my university studies at the Faculty of Sciences in Meknes and obtained a degree in Physical Materials Science with distinction, while working on a graduation research project with competent supervisors that enabled me to gain experience in conveying information to students in a smooth and simple manner.

Experience / Qualifications

I also continued my studies at the Faculty of Sciences in Rabat to obtain a Master's degree in Theoretical Physics under the supervision of competent and renowned instructors, and to gain more experience.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

Arabic

French

English

Skills

Electrical engineering

Optical engineering

Mechanical engineering

Availability of a typical week

(GMT -05:00)

New York

At teacher's location and via webcam

At student's home

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Currently enrolled in the doctoral cycle of the Mohammadia School of Engineering (EMI) of Rabat. I propose courses of support in Sciences of engineer
I am a graduate professor of ENSET Rabat with many educational experiences and motivated for your success. My Pedagogy is based on a translation in clear terms and contextualized courses and exercises often presented in a way too abstract. I attach particular importance to showing the student that with a minimum of work, provided that it is regular, one can arrive at quite satisfactory results, and that when one understands what he is question, everything clears naturally.

Hello,

I offer my services to anyone who has difficulties in physics, chemistry and organic chemistry, and in particular concerning:

- Mechanical waves and its applications (sound waves)
- Light wave
- Nuclear physics (radioactivity)
- Nucleus mass and energy
- RC circuit -RL-RLC
- Newtonian mechanics
- Chemical transformations
- Electrolytic solutions
- etc

I am a serious and methodical person, and my only goal is to help the student understand and evolve.

Thank you

Course in Electronics: Microcontroller (PIC, atmega ..), Electronic circuit, Power electronics
Automation course: GRAFCET, LADDER, Bascule, Combinatorial logic
Electric motor: Asynchronous machine, DC motor, synchronous machine

As an Associate Professor of Industrial Engineering (CPGE), a State Engineer in Mechanical Engineering and a Doctor (PhD), I offer private mechanics lessons all year round, remotely or at home, for pupils and students.

For who ?

Objective of excellence (improvement, ranking, selective applications).

Refresher courses in case of gaps or weak foundations.

Consolidation of fundamentals and mastery of useful techniques throughout the course.

Targeted preparation for tests, exams and oral presentations.

CPGE competitive entrance exams: CCINP, Centrale, Mines-Ponts, MP, PSI, TSI streams.

Technological Baccalaureate: STM, STE, SMB (refresher and intensive training).

Project support (final year project, TIPE, mini-projects).

Revision/preparation: review the essentials of the past year and get ahead.

Subjects taught

Solid mechanics: kinematics, statics, dynamics, energy (and kinetics).

Strength of materials & vibration; elasticity; fracture mechanics.

Mechanism theory.

Mechanical engineering & mechanical manufacturing (processes, tolerances, metrology).

Materials: mechanical characterization; equilibrium diagrams (binary, Fe-C).

Thermal and thermochemical treatments.

MMC (continuous media): modelling and calculations.

CAD/Design: CATIA, SolidWorks.

NDT/NDT: principles and applications (basics).

Terms and conditions

Format: individual or small groups.

Location: online (interactive whiteboard, screen sharing, files) or at home.

Method: initial diagnosis, personalized work plan, progressive exercises, exam-style questions, annotated corrections, regular assessments.

Materials: summary sheets, roadmaps, bibliographies, corrected exercises.

Targeted results

Solid foundations, operational methods, autonomy and sustainable performance.

Effective preparation for assessments and competitions, increased confidence and speed.

Electrical engineering:
- Single-phase sinusoidal regime and three-phase sinusoidal regime
- transformers
- The direct current machine
- The asynchronous machine
- The synchronous machine

Power electronics:
- AC/DC converter (Rectifiers)
- DC/DC converter (Choppers)
- DC/AC converter (Inverters)
- AC/AC converter (Dimmers)

Analog and digital electronics:
- Semiconductors (diodes, transistors, etc.)
- Operational amplifiers
- analog and digital filters
- converters: CAN and CNA
- Combinational circuits and sequential circuits

Sensors and instrumentation.

Signal processing

Data transmission

Automatic:
- Concepts on automatic
- The correctors: P, PI, PID, phase advance, phase delay, ...
- Regulation and servoing

Control of electrical machines:
- Direct current machine control
- Control of the asynchronous machine
- Control of the synchronous machine

Industrial automation and IT

Hello,

Engineer experienced in structural studies offers high-level training in RDM calculation and structure.

Training via google meet or zoom.

the materials are: Resistance of materials, structural calculation, reinforced concrete calculation

State engineer in aeronautics (mechanical engineering) laureate the Royal Air School of Marrakech accumulating 5 years of experience, Phd in numerical mechanical calculation (vibroacoustic and aeroacoustic) at the EMI and specialized master in nonlinear mechanics offers you private lessons in mechanics at a distance (or at home) for pupils and students:
• Who has basic difficulties or deficiencies in Mechanics...
• Who want to strengthen the base and get used to the techniques seen throughout the course and which are always useful to know and master.
• Who needs to prepare specific competitions (Or DS).
• Who needs help with the graduation project.
• Who wish to review the essentials of the previous year's program and get ahead of the program.
the courses I offer:
-the mechanics of rigid solids (Kinematics, Statics, Dynamics, Kinetics, Energetics).
- Theory of Mechanisms.
- solid mechanics (materials and structural calculation), vibrations, dynamics
- the mathematical tools necessary for mechanics (modeling and simulation process) - finite element method for the linear and nonlinear case.
- Computer-assisted design CAD (Catia).
- Tired
-science of materials and composite materials.
-mechanics of fluids and thermal (CFD).
- Non-destructive testing.

Do you want to significantly increase your child's mathematical average?
Do you want it to integrate a selective course?
Do you want it to become autonomous?

For 7 years, I have helped more than 100 students in difficulty from middle school and high school to achieve their goals and regain self-confidence.

My method in 3 points:
- in the short term, significantly increase the average by assimilating the course and preparing for the next tests (assimilating the course, writing files, practicing standard exercises, anticipating the teacher's expectations and test questions, having methods of writing)
- in the medium term, integrate reasoning and work methods (learn to work regularly in this order: assimilation, training exercise, preparation for the test and analysis of the pass test)
- in the long term, set a goal, build the steps to reach this goal, become aware of the SIMPLICITY of math, have confidence in your abilities, release your potential)

Your child can contact me whenever he wants

If you want to increase your child's math results, contact me before the next test!

Doctor of state and also engineer in electrical systems offers project supervision (PFE, PFA, PER ...) with achievement in the following areas:

Industrial automation
Industrial supervision
Electronics-home automation
Programmable cards: Arduino, DSP, FPGA...
Design and production of models
Renewable energies
....

Doctor and graduate in mechanical engineering, I give private lessons at the following level:
* Kinematic Model Course (direct or inverse)
* Dynamic Model Course (direct or reverse)
* Static Model Course (direct or inverse)
* Course Planning the trajectory
* Robot Control Course
* Programming course on Matlab or RoboStudio.

Do you want to master the most used design software and bring your ideas to life in 3D?
I offer specialized courses to become a pro in Catia V5/V6 and NX Siemens.
You are looking for a designer job. Most large industrial companies work with NX siemens and CatiaV5/V6. Now you too!

Currently enrolled in the doctoral cycle of the Mohammadia School of Engineering (EMI) of Rabat. I propose courses of support in Sciences of engineer
I am a graduate professor of ENSET Rabat with many educational experiences and motivated for your success. My Pedagogy is based on a translation in clear terms and contextualized courses and exercises often presented in a way too abstract. I attach particular importance to showing the student that with a minimum of work, provided that it is regular, one can arrive at quite satisfactory results, and that when one understands what he is question, everything clears naturally.

Hello,

I offer my services to anyone who has difficulties in physics, chemistry and organic chemistry, and in particular concerning:

- Mechanical waves and its applications (sound waves)
- Light wave
- Nuclear physics (radioactivity)
- Nucleus mass and energy
- RC circuit -RL-RLC
- Newtonian mechanics
- Chemical transformations
- Electrolytic solutions
- etc

I am a serious and methodical person, and my only goal is to help the student understand and evolve.

Thank you

Course in Electronics: Microcontroller (PIC, atmega ..), Electronic circuit, Power electronics
Automation course: GRAFCET, LADDER, Bascule, Combinatorial logic
Electric motor: Asynchronous machine, DC motor, synchronous machine

As an Associate Professor of Industrial Engineering (CPGE), a State Engineer in Mechanical Engineering and a Doctor (PhD), I offer private mechanics lessons all year round, remotely or at home, for pupils and students.

For who ?

Objective of excellence (improvement, ranking, selective applications).

Refresher courses in case of gaps or weak foundations.

Consolidation of fundamentals and mastery of useful techniques throughout the course.

Targeted preparation for tests, exams and oral presentations.

CPGE competitive entrance exams: CCINP, Centrale, Mines-Ponts, MP, PSI, TSI streams.

Technological Baccalaureate: STM, STE, SMB (refresher and intensive training).

Project support (final year project, TIPE, mini-projects).

Revision/preparation: review the essentials of the past year and get ahead.

Subjects taught

Solid mechanics: kinematics, statics, dynamics, energy (and kinetics).

Strength of materials & vibration; elasticity; fracture mechanics.

Mechanism theory.

Mechanical engineering & mechanical manufacturing (processes, tolerances, metrology).

Materials: mechanical characterization; equilibrium diagrams (binary, Fe-C).

Thermal and thermochemical treatments.

MMC (continuous media): modelling and calculations.

CAD/Design: CATIA, SolidWorks.

NDT/NDT: principles and applications (basics).

Terms and conditions

Format: individual or small groups.

Location: online (interactive whiteboard, screen sharing, files) or at home.

Method: initial diagnosis, personalized work plan, progressive exercises, exam-style questions, annotated corrections, regular assessments.

Materials: summary sheets, roadmaps, bibliographies, corrected exercises.

Targeted results

Solid foundations, operational methods, autonomy and sustainable performance.

Effective preparation for assessments and competitions, increased confidence and speed.

Electrical engineering:
- Single-phase sinusoidal regime and three-phase sinusoidal regime
- transformers
- The direct current machine
- The asynchronous machine
- The synchronous machine

Power electronics:
- AC/DC converter (Rectifiers)
- DC/DC converter (Choppers)
- DC/AC converter (Inverters)
- AC/AC converter (Dimmers)

Analog and digital electronics:
- Semiconductors (diodes, transistors, etc.)
- Operational amplifiers
- analog and digital filters
- converters: CAN and CNA
- Combinational circuits and sequential circuits

Sensors and instrumentation.

Signal processing

Data transmission

Automatic:
- Concepts on automatic
- The correctors: P, PI, PID, phase advance, phase delay, ...
- Regulation and servoing

Control of electrical machines:
- Direct current machine control
- Control of the asynchronous machine
- Control of the synchronous machine

Industrial automation and IT

Hello,

Engineer experienced in structural studies offers high-level training in RDM calculation and structure.

Training via google meet or zoom.

the materials are: Resistance of materials, structural calculation, reinforced concrete calculation

State engineer in aeronautics (mechanical engineering) laureate the Royal Air School of Marrakech accumulating 5 years of experience, Phd in numerical mechanical calculation (vibroacoustic and aeroacoustic) at the EMI and specialized master in nonlinear mechanics offers you private lessons in mechanics at a distance (or at home) for pupils and students:
• Who has basic difficulties or deficiencies in Mechanics...
• Who want to strengthen the base and get used to the techniques seen throughout the course and which are always useful to know and master.
• Who needs to prepare specific competitions (Or DS).
• Who needs help with the graduation project.
• Who wish to review the essentials of the previous year's program and get ahead of the program.
the courses I offer:
-the mechanics of rigid solids (Kinematics, Statics, Dynamics, Kinetics, Energetics).
- Theory of Mechanisms.
- solid mechanics (materials and structural calculation), vibrations, dynamics
- the mathematical tools necessary for mechanics (modeling and simulation process) - finite element method for the linear and nonlinear case.
- Computer-assisted design CAD (Catia).
- Tired
-science of materials and composite materials.
-mechanics of fluids and thermal (CFD).
- Non-destructive testing.

Do you want to significantly increase your child's mathematical average?
Do you want it to integrate a selective course?
Do you want it to become autonomous?

For 7 years, I have helped more than 100 students in difficulty from middle school and high school to achieve their goals and regain self-confidence.

My method in 3 points:
- in the short term, significantly increase the average by assimilating the course and preparing for the next tests (assimilating the course, writing files, practicing standard exercises, anticipating the teacher's expectations and test questions, having methods of writing)
- in the medium term, integrate reasoning and work methods (learn to work regularly in this order: assimilation, training exercise, preparation for the test and analysis of the pass test)
- in the long term, set a goal, build the steps to reach this goal, become aware of the SIMPLICITY of math, have confidence in your abilities, release your potential)

Your child can contact me whenever he wants

If you want to increase your child's math results, contact me before the next test!

Doctor of state and also engineer in electrical systems offers project supervision (PFE, PFA, PER ...) with achievement in the following areas:

Industrial automation
Industrial supervision
Electronics-home automation
Programmable cards: Arduino, DSP, FPGA...
Design and production of models
Renewable energies
....

Doctor and graduate in mechanical engineering, I give private lessons at the following level:
* Kinematic Model Course (direct or inverse)
* Dynamic Model Course (direct or reverse)
* Static Model Course (direct or inverse)
* Course Planning the trajectory
* Robot Control Course
* Programming course on Matlab or RoboStudio.

Do you want to master the most used design software and bring your ideas to life in 3D?
I offer specialized courses to become a pro in Catia V5/V6 and NX Siemens.
You are looking for a designer job. Most large industrial companies work with NX siemens and CatiaV5/V6. Now you too!

Good-fit Instructor Guarantee

Contact Mohamed