I teach electrical & electronic engineering. I also teach Physics, and Maths.

From 39 £ /h

I have a sound teaching experience (>5 years). I completed my PhD studies in Electrical Power Network and specialized in power system protection and control system as applied in transmission and distribution system from The University of Manchester. I have professional consulting and teaching experience in HV, LV power systems such as load/power flow, short circuit, fault level, protection setting calculations, power quality- harmonics, earthing design, modelling network with associated tools including Multisim software.

The area I provide teaching services are as follows:-

For PhD students:
- Power system protection,
- Fault level/short circuit
- Load flow
- Earthing design

For master students:
- Power System Analysis, Protection study, Stability, Smart grids, Power System Operation, Economics and asset management.

For undergraduate students:
- Power plant, HV engineering
- Power System Analysis
- Electrical Transportation
- Electrical circuit analysis and design
- Analogue and digital system
- Electronic materials, semi-conductor devices
- Signals and Systems
- Maths and control systems
- Physics

For college or foundation students:
- Electrical and electronic engineering
- City & Guilds 2357 in Electrical installation
- BS 7671:2018 Requirements for Electrical Installations

Extra information

I teach electrical & electronic engineering. I also provide solutions on electrical power systems, renewable energy, electronics, analog & digital circuits, Maths and Physics.

Location

Online from United Kingdom

About Me

Education

I completed my PhD studies in Electrical Power Network and specialized in power system protection and control system as applied in transmission and distribution system from The University of Manchester.

Experience / Qualifications

I have a sound teaching experience (>5 years). I have professional consulting and teaching experience in HV, LV power systems such as load/power flow, short circuit, fault level, protection setting calculations, power quality- harmonics, earthing design, modelling network with associated tools including Multisim software.

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Skills

Electrical engineering

Electronic circuits

Electrical circuits

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Adam

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Anh

4.85

(13)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

شريف

4.85

(13)

Specialized in teaching curricula and courses for male and female students of engineering faculties at all university levels. Bachelor’s, Master’s, Ph.D., Departments of Mechanics, Electricity, Mechatronics, and Aviation.
We also teach the same disciplines curricula to students of colleges and engineering and technical institutes.

Experience in teaching the curricula of all Gulf and Egyptian universities and universities in Britain and America for scholarship students.

Some of the curricula we teach are
Mathematics Electrical Circuits Physics Design Fluid Mechanics, Thermodynamics, Power Stations, Electrical Machines, MATLAB, SolidWorks, Algebra, Stereoscopic Engineering, Analytical Engineering, Integration of Control Differential and Theory of Machines, Hydraulic Circuits, Motors, Refrigeration and Air Conditioning, Aerodynamics, Mechanical Vibrations, Stress Analysis, Nuclear Heat Transfer Water desalination transmission and distribution networks
fluid mechanics thermodynamics physics, thermodynamics 1 and 2, thermo b, calculus, turbo diesel engines, calculus, integration, control and design of Fluid Turbo Machine and electrical circuits MATLAB thermodynamics fluid .aerodynamics heat transfer PLC mathematics matlab control power plant air conditioning system and refrigeration ice circuit ,thermo b vibration theory of machine robots Aerospace engineering aeronautics
CFD fluent ansis gambit solidworks electric machines stress analysis design
thermodynamics b fluid advanced mathematics aerodynamics heat and mass transfer PLC mathematics matlab control power plant air conditioning system numerical methods desalination hydraulic circuit and refrigeration nuclear energy calculus Saudi Aramco tests turbo machine Quadcopter Drones
FE course projects and more for mechanical engineering, electrical engineering civil
engineering industrial engineering mechatronics engineering

Some of the universities we teach are
Princess Nourah bint Abdulrahman University - PNU - Saudi ArabiaKING ABDULAZIZ UNIVERSITY - Saudi ArabiaDammam University (Imam Abdul Rahman bin Faisal) - (imam abdulrahman bin faisal university)University of Dammam - Saudi ArabiaKing Faisal University - King Faisal University - KuwaitUniversity of Kuwait - kuwait university - KuwaitKuwait College of Science & Technology - KuwaitEmirates College of Technology - Emirates College of Technology - United Arab EmiratesYanbu University College - Saudi ArabiaNYIT - New York Institute of Technology (NYIT) - United Arab EmiratesKing Fahd University of Petroleum and Minerals (KFUPM) - Saudi ArabiaThe Petroleum Institute (PI) - United Arab EmiratesThe American University of Kuwait - American University of Kuwait - KuwaitAmerican University of the Middle East - American University of the Middle East - KuwaitCanadian University Dubai (CUD) - United Arab EmiratesSultan Qaboos University - Sultan Qaboos University - Sultanate of OmanHigher College of Technology - Sultanate of OmanGerman University of Technology in Oman - GERMAN UNIVARCITY OF TECHNOLOGY IN OMAN - Sultanate of OmanUniversity of Nizwa - University of Nizwa - Sultanate of Oman
Kuwait University Hafr Al-Batin University Princess Nora Bint Abdul Rahman University King Abdulaziz University Jubail Industrial College Jubail University College Dammam University King Faisal University Kuwait College of Science and Technology Emirates College of Technology Yanbu University College Saudi Arabia New York Institute of Technology Petroleum Institute Saudi Aramco Exams King Fahd University of Petroleum and Minerals The British University, The American University in Kuwait, The American University of the Middle East, Kuwait
Canadian University, Dubai, Sultan Qaboos University, Sultanate of Oman, Higher College of Technology, Sultanate of Oman
The Russian University The German University The German University The University of Nizwa Qatar University Northwestern University in Qatar - Northwestern University in Qatar Texas A&M University at Qatar - QatarGeorgetown University in Qatar - QatarVirginia Commonwealth University in Qatar - Virginia Commonwealth University - Qatar - College of the North Atlantic Qatar - Qatar

Pierre

4.85

(13)

I adapt to the profile of each intern or student according to their objective and level.
The goal is not to work endless hours, but to show how to be able to work alone or partially independently in a short time.
It is always a pleasure for me to be recognized in the street 15 years after classes, and to be thanked for having provided a real service to the person concerned.
This activity is a passion of mine that I have been pursuing since I was 16 years old.
I hope to be able to share it with you to prepare effectively, by significantly reducing your legitimate apprehension of exams.

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

Abdelmalek

4.85

(13)

This hands-on training pathway is designed to help students kickstart any project, specifically tailored for OT labs and industrial applications. Starting from absolute scratch, students will build a strong foundation in Python programming through practical, industry-relevant concepts.

Curriculum Outline: |
01 - Python Environment Setup & Basics |
02 - Python Variables, Numbers, Bytes & Hex |
03 - Control Flow Logic Functions |
04 - Data Structures (Lists, Tuples, Dictionaries & Sets) |
05 - String Formatting, Comprehensions & Exception Handling |
06 - File IO, Pathlib & Context Managers |
07 - Object-Oriented Programming (Classes & OOP) |
08 - Standard Library, Modules & Networking Basics |

Assessment & Evaluation:
Students will take a mini-test after the completion of each module. Additionally, an Audit & Performance Evaluation report will be sent following the tests.
Duration:
5 days to 15 days (depending on the pace of the cohort)

Henoc

4.85

(13)

Electricity Teacher - Live Lessons from a Real Classroom

TIRED OF CLASSES IN FRONT OF A BLANK SHEET OF PAPER?

I give my lessons LIVE from a classroom with a blackboard and chalk.
Like at school, but with Google Meet at home.

FOR WHO ?
MIDDLE SCHOOL / HIGH SCHOOL: Circuits, laws, safety, reading diagrams
Vocational Baccalaureate: Power diagram, control diagram, wiring, installation
BTS: Industrial diagrams, motor starting, relays and contactors

MY METHOD:
We're working on YOUR exercises. I'll explain them to you step by step on the board.
Clear and concrete explanations with examples from construction sites.
You see everything I write and you leave with photos from the course.

HOW DOES IT WORK?
100% online course via Google Meet.
Professional quality: Sound + Image + Visible painting.
Opening hours: Evenings and weekends, French time.

Levels: Beginner to Advanced. First lesson to try it out.

Dhanush

4.85

(13)

Electrical engineering is a current trend and upcoming future necessity for people day to day life. so I will teach about how our electrical engineering help our day to day life and it remain use full and safe to our environment and people . People of this world must know about safety measures of electrical system. Also I will teach how to protect our environment and nature by using electrical engineering concept. The above content what I mentioned is learned by future students and taught by me.

Amir

4.85

(13)

Physics is a fascinating subject that helps us understand how the world around us works. As an experienced scientist with a passion for teaching and sharing science, I enjoy helping students develop a deeper and more intuitive understanding of physics. My lessons cover topics including classical mechanics, optics, electromagnetism, quantum mechanics, and quantum optics, and can be tailored to your level and learning goals. Whether you are preparing for an exam, studying at university, or simply curious about physics, I focus on clear explanations, problem-solving, and making even challenging concepts easier to understand.

Uma

4.85

(13)

Electronic, communication systems,electromagnetic fields , embedded system, digital electronic, digital signal processing, digital image processing,optical communication, signals and systems,applied electronics, microwave engineering,TLN,radio engineering

Mayank

4.85

(13)

In this 30-minute class, we will understand the two core components of a microprocessor: the ALU (Arithmetic Logic Unit) and the Control Unit. I will explain their structure, functions, and how they work together to execute instructions, using simple diagrams and practical examples. The goal is to build a clear understanding of how a microprocessor processes and controls data.

Hend

4.85

(13)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Mohamed

4.85

(13)

Teaching electrical engineering online to university students

I offer online private lessons for engineering college students, focusing on simplifying engineering concepts, solving problems step by step, and practicing exam and project questions.

I help students understand the material from the ground up instead of relying on memorization, using practical examples, illustrations and simulations when needed.

The subjects I teach include:

Electrical Circuits
Electrical Machines
- Electrical Power Systems
Power System Protection
Electrical Installation & Distribution
Energy Conversion
Renewable Energy Systems
High Voltage and High Voltage Engineering
- Transformer stations and substations
- Electronics and basic electronic circuits
- Basic Control Systems
Engineering mathematics used in electrical engineering

During the lecture, I focus on:

1. Explain the concept in a simple and organized way.
2. Derivation of important laws and equations.
3. Solve various examples and problems step by step.
4. Training the student on exam questions.
5. Explaining common mistakes and how to avoid them.
6. Use MATLAB/Simulink, ETAP and simulation when needed.
7. A comprehensive review before tests and exams.

Teaching method:

- Individual lectures or small online groups.
- Live and interactive explanation via Zoom or Google Meet.
- Sharing the screen and writing on the electronic whiteboard.
- The possibility of recording the lecture as agreed.
- Providing summaries and practice problems for review.

The goal: for the student to be able to understand the material, solve problems on their own, and prepare confidently for exams and engineering projects.