Wind turbines technology and its main components functioning

From 61 £ /h

Wind turbine technology,
different aspects that can be covered:
- electrical systems calculation.
- loads calculation.
- structural dynamics calculation.
- control system design.

Providing a complete understanding about how a wind turbine system as well as its components work.

Extra information

own computer and/or laptop

Location

Online from Spain

About Me

I'm a easy going teacher, I really like curious and hard worker students.
I like to spend as much time as necessary to provide the most complete explanation to help the student better understand.

These classes can be a perfect complement for an engineer willing to increase his/her renewable engineering formation and skills.

Education

DTU Wind Energy master by Danish Tecnical University - DTU (Denmark). Two years course.
Industrial Engineering master by Universitat Jaume I - UJI (Spain). Five years course.

Experience / Qualifications

13 years experience as renewable project engineer and many years as engineering department supervisor. RE Energy consultant expert

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Duration

60 minutes

The class is taught in

English

Spanish

Catalan

Skills

Engineering

Mechanical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Solar PV power plant and its main components functioning

61 £ /h

Solar PV technology, different aspects that can be covered:
- electrical systems calculation.
- control system design.
- monitoring, diagnosis and maintenance.

Providing a complete understanding about how a solar PV power plant as well as its components work.

Hybrid Power Plants: Wind and Solar PV with Energy Storaging

99 £ /h

Development of an algorithm methodology to minimize the hybrid
power produced forecast error so it’s important to keep in mind that I’m not presenting an optimization model in this work. I’ll show the dependency of the battery size used for this purpose so using the forecast error we will reduce its variability. We will see what positive
effects adding a battery within a hybrid wind and solar power plant has, its sensitivity effect, having as main advantages these:
• reduction of the curtailment produced, bigger battery size less curtailment.
• repair of the forecast error

Matías

4.88

(85)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Haider

4.88

(85)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered (online) in

✔ Math

✔ Physics

✔ Technical mechanics (statics, strength theory, kinematics)

✔Technical drawing

✔ Machine elements

✔ Thermodynamics

✔ Fluid dynamics

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I am looking forward to hearing from you.

Jeremy

4.88

(85)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 6 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching. In private teaching, I have experience tutoring people with learning disabilities (ADHD, Dyslexia, Discalculia and more), younger kids of ages 7-12 and older students preparing for their final baccalaureate exams in advanced maths/physics curriculums.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Anh

4.88

(85)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Samaa

4.88

(85)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

عبدالرحمن

4.88

(85)

• I specialize in teaching Production and Operations Management for engineering and business students. My lessons focus on helping students understand core concepts, solve related problems, and prepare for exams. I stay in contact with students throughout the semester and provide recorded explanatory lectures along with handouts to support learning and revision.

• This course is designed for engineering and management students who want to understand how companies design and manage production systems. We will cover the following key topics:

Introduction to Operations Management

Demand Forecasting

Product and Process Design

Capacity Planning

Facility Location

Facility Layout

Inventory Management

Production Planning and Scheduling

Quality Management

Supply Chain Management

Reza

4.88

(85)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
Key topics that I teach for this course include:
• Calculus: Differentiation & integration, Multivariable calculus
• Linear Algebra: Matrices, vectors, systems of equations, Eigenvalues and eigenvectors
• Differential Equations: First- and second-order ODEs, Laplace transforms
• Complex Numbers: Polar form, Euler’s formula
• Vector Calculus: Gradient, divergence, curl, Line and surface integrals
• Series & Transforms: Taylor series, Fourier series

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Alonso

4.88

(85)

I am a Mechanical Engineer, Master in Mechanical Engineering and Retired Full Professor from the University of Zulia (Venezuela).
I taught university-level engineering courses for over 30 years. I helped train more than 9,000 students. I supervised over 50 undergraduate theses. I taught undergraduate and graduate courses in various subjects related to mechanical engineering (Mathematics, Physics, Dynamics, Mechanisms, Strength of Materials, Stability, Solid Mechanics, Fluid Mechanics, Machine Elements, Machine Design, Statics, Mechanics of Machines, Mechanics of Materials, Rational Mechanics, Principles of Lubrication, Simulation of Sliding Bearings, Advanced Mechanics of Materials, Stress Analysis, Failure Theories, Structures, Mechanisms). In addition, I have given private lessons in Physics, Statics, Strength of Materials, Stability I, Stability II, Fluid Mechanics, Rational Mechanics, Mechanics of Materials, Dynamics, Elements of Machines and Mechanisms for 7 years to students from different countries of the world (online) and in particular to students from Argentina (online and in person) from various universities in the country (UBA, ITBA, UTN, UNLZ, UADE, etc).

Stop struggling with Strength of Materials! Many students get lost among so many formulas. My goal is for you to understand the physical logic behind each problem. I am a university professor and offer personalized tutoring for undergraduate and graduate students.
What we will do:
- Solve exercise guides.
- Intense preparation for midterms/finals.
- Theoretical explanations focused on practice.
I have extensive experience teaching courses related to Mechanical Engineering at both the undergraduate and graduate levels. I have taught courses such as Strength of Materials, Stability I, Stability II, Statics, Mechanics of Materials, Elasticity, Mechanics of Solids, Fluid Mechanics, Machine Elements, Rational Mechanics, Stress Analysis, Mechanisms, Mechanics of Machines, and Advanced Mechanics of Materials. Furthermore, I have a strong background in Mathematics, Mathematical Analysis, Calculus, and Physics (Statics, Kinematics, and Dynamics). I emphasize teaching through problem-solving and practical applications.
For online classes I use a digitizing tablet connected to the computer and an interactive digital whiteboard that allows me to develop and explain the solution to exercises or the theory in real time directly on PDF or JPG files (they can be exercise or theory guides), which makes the class more enjoyable and efficient and also guarantees the same quality as a face-to-face class.

I am a University Professor with extensive experience in teaching subjects related to Mechanical Engineering at the Undergraduate and Postgraduate levels. I have taught subjects such as Strength of Materials, Stability, Elasticity, Solid Mechanics, Machine Elements, Rational Mechanics, Stress Analysis, Mechanisms, Machine Dynamics and advanced materials mechanics. In addition, I have a solid background in Mathematics, Mathematical Analysis, Calculus and Physics (Kinematics and Dynamics). I emphasize through problem solving and practical applications.

Mohammad

4.88

(85)

PhD physicist and nuclear engineer with over 10 years of research experience at CERN and CNRS, offering tailored private lessons in physics and applied mathematics for university students and motivated high school students preparing for higher education.
I specialise in helping students build genuine understanding of the principles behind complex problems, not just memorise formulas for exams. My teaching adapts to your level, your pace, and your specific goals.
Topics I can cover include classical mechanics, thermodynamics, fluid mechanics, electromagnetism, quantum physics, nuclear physics, radiation physics, applied mathematics, differential equations, linear algebra, probability and statistics, and numerical methods.
I have a PhD in nuclear engineering from Université Grenoble Alpes, an MSc in nuclear plant design from Université Paris-Saclay, and a BSc in nuclear engineering. I have worked as a research fellow at CERN and as a doctoral researcher at CNRS, and I have supervised students and interns throughout my career.
Lessons are available online via video call or in person in Geneva. I am flexible on scheduling and happy to discuss your specific needs before we start.

Baia

4.88

(85)

I'm a working MEP engineer, currently building Python automation for Revit workflows daily - plan checks, model coordination, and repetitive drafting tasks. I teach other engineers, architects, and BIM professionals how to do the same, using pyRevit and real project workflows, not toy examples.

Topics include:
pyRevit fundamentals and setup
Automating repetitive Revit tasks (model checks, plan generation, data extraction)
Writing custom scripts for your firm's specific workflows
Applying Python automation to real MEP/BIM projects

Aashish

4.88

(85)

Master Engineering Drawing, Technical Drawing and Engineering Graphics with a practical, step-by-step approach.

Are you a student who finds engineering drawing difficult to visualize? Do you want to understand orthographic projections, front/top/side views, sections, dimensions, scales, and 3D shapes instead of simply memorizing drawing procedures?

I provide friendly, patient and practical online coaching in Technical Drawing, Engineering Drawing, Engineering Graphics, CAD and Engineering Design for students from high school through university, as well as professionals who want to strengthen their technical drawing and design skills.

What You Will Learn

The classes are designed to develop both your drawing skills and your ability to visualize engineering objects in 2D and 3D.

Topics can include:

Engineering Drawing fundamentals and drawing conventions
Visualization of 2D and 3D geometric shapes
Orthographic projection
Front, Top, Side and Back views
First-angle and Third-angle projection
Isometric views and pictorial representation
Sectional views and sectional drawings
Hidden lines, centre lines and construction lines
Dimensions, annotations and engineering symbols
Scales and measurement
Geometrical constructions
Development of surfaces
Intersections of solids
Tolerances and basic fits
Engineering drawing standards and conventions
Reading and interpreting engineering drawings
Production-oriented technical documentation
Mechanical components and product drawings
Basic engineering design principles
From Hand Drawing to CAD and 3D Models

I also help students understand how traditional engineering drawing connects with modern Computer-Aided Design (CAD).

You can learn how a product or mechanical component can be:

Visualized → Sketched → Dimensioned → Created in CAD → Converted into a 3D Model → Prepared for Manufacturing / 3D Printing

Depending on your requirements, lessons can include AutoCAD, 2D drafting, 3D modelling and engineering design workflows.

The objective is not only to teach you which commands to use, but to help you understand why a drawing is created in a particular way and how engineers use drawings to communicate a design.

Practical, Student-Focused Teaching

My teaching approach is based on understanding through visualization and practice.

Instead of simply demonstrating a drawing, I explain:

How to visualize the object before drawing it
How to identify the different surfaces and views
How the front, top and side views are related
How to determine the required dimensions
How to construct the drawing step by step
How to avoid common drawing mistakes
How to interpret engineering drawings correctly
How the same concept is applied in CAD and real-world design

Lessons include worked examples, practical exercises and real engineering/product examples so that students can gradually develop confidence and independence.

Who Are These Classes For?

These lessons are suitable for:

High school students studying technical/engineering drawing
Diploma students
Mechanical Engineering students
Civil Engineering students
Architecture students
Industrial Engineering students
Product Design students
Manufacturing Engineering students
Other engineering students studying Engineering Graphics or Engineering Drawing
Students preparing for examinations
Beginners learning CAD and technical drawing
University students working on drawing or CAD projects
Professionals who want to refresh or improve their technical drawing skills

Beginners are welcome. No advanced prior knowledge is required.

Online & Interactive Lessons

All lessons are conducted online and interactively.

Depending on the topic, I can use:

Screen sharing
Live drawing demonstrations
CAD demonstrations
2D drafting
3D modelling
Step-by-step problem solving
Practical drawing exercises
Real-world engineering examples

You can bring your specific syllabus, textbook exercises, assignments, CAD projects or exam topics, and the lessons can be adapted to your requirements.

Learn to Think Like a Designer

Engineering drawing is more than producing a neat drawing on paper. It is a method of visualizing ideas, communicating designs and understanding how objects are constructed and manufactured.

My goal is to help you move from:

“I don't understand this shape.”

to

“I can visualize it, draw its views, add the required dimensions and understand how it would be represented in CAD and manufactured.”

Whether you are starting from zero, preparing for an examination, struggling with engineering graphics, learning CAD, or working on a design project, I will guide you step by step at your own pace.

Book a lesson and let's make Engineering Drawing and CAD easier, more visual and more practical.

Hakan

4.88

(85)

I offer clear and structured Calculus I and Calculus II lessons for university students, particularly those studying engineering, science, and other STEM subjects.

My aim is not only to help you solve problems, but also to understand the mathematical ideas behind the methods. I explain concepts step by step and connect calculus to practical applications in physics and engineering whenever useful.

Topics can include:

• Functions, limits, and continuity
• Derivatives and differentiation techniques
• Applications of derivatives and optimization
• Integrals and integration techniques
• Applications of definite integrals
• Sequences and series
• Parametric and polar functions
• Introduction to multivariable calculus
• Partial derivatives
• Engineering applications of calculus

Lessons can be adapted to your individual goals, whether you need help understanding a difficult topic, preparing for an exam, reviewing a course, or solving practice problems.

As a mechanical engineer with university-level teaching and laboratory experience, I regularly work with mathematics in subjects such as mechanics, thermodynamics, fluid mechanics, heat transfer, and computational engineering. This allows me to explain not only how a mathematical method works, but also why it is useful.

Lessons are interactive and tailored to your current level. Students are encouraged to ask questions throughout the lesson.

Hend

4.88

(85)

In this lesson we cover the basics of statics, the science that studies stationary objects under the influence of different forces, and is the cornerstone of engineering subjects such as mechanics and construction.
What you will learn in this lesson:
• The concept of power, its types, and methods of representing it
• Analyzing forces into their components
Conditions for equilibrium of bodies
• Solve practical examples step by step
The lesson is suitable for engineering students of all specializations, and for anyone who wishes to build a strong understanding of the material before moving on to advanced subjects.

Alaaeldin

4.88

(85)

Learn PLAXIS 2D & 3D and Geotechnical Engineering with a PhD Researcher in France!

I am a PhD candidate in Geotechnical Engineering at the University of Lille, France, specializing in finite element modelling (FEM), soil–structure interaction, and advanced numerical simulations.

I offer personalized online lessons for civil engineering students, master's and PhD students, researchers, and practicing engineers.

What you can learn:

PLAXIS 2D & 3D
Getting started with PLAXIS and understanding the modelling workflow.
Geometry creation, soil layers, materials, and boundary conditions.
Soil constitutive models and parameter selection.
Mesh generation and staged construction.
Foundation settlement and soil–structure interaction.
Retaining walls, excavations, and underground structures.
Results interpretation and model validation.

Geotechnical Engineering

Soil Mechanics and Foundation Engineering.
Earth pressure and retaining structures.
Settlement and bearing capacity.
Soil–structure interaction.
Personalized Learning

Lessons are adapted to your experience, from beginner to advanced level. We can work through practical examples, discuss theoretical concepts, or review your own numerical models step by step.

My goal is to help you understand both the engineering principles and their practical implementation in numerical modelling software.

Lessons are available online in English, Arabic, or French.

Feel free to contact me to discuss your learning objectives and arrange a personalized lesson!